lee pro 1000 with autodisk, 223, h335, 55g bullets

[Boostedtwo]

Im using 2 disk in the autodisk, can someone please comment back on the 2 correct disk so im sure? I used to have a turret press with a perfect powder measure, but since I bought this pro 1000 progressive press I havent ran any through yet since I wanted to double check on the correct 2 disk to be using?

 

[tightgroup tiger]

I'm not sure I understand your question but from my point of view:

You have to double check the load with a scale. Auto-discs deal with volume and your loading books deal with weight.

Different powders have different densities and their weight varies per volume so volume measuring doesn't cut it.

If you don't have a beam scale you better buy one to set up your powder measure accurately so you don't have accidental overloads.

When stacking your discs always put the larger of the two holes on the bottom.

Hope I didn't miss-intererate your question.

 

[beeenbag]

I load h335 with the largest hole on a single disk for my .223. I forget the charge weight but it's not far from max.

 

[Boostedtwo]

Thx

 

[mdemetz]

This will get you close(usually low). Remember to always have the smaller hole on the top disk.

 

[Boostedtwo]

thanks mdemetz that is very helpful