Load Data for 32 sw long with 98grn DEWC over VV320

[steeel]

Hi guys I inherited a large amount of 98grn Double Ended Wad Cutters (they look like little barrels with centre lube rings) and a big supply of Vhitavouri N320 for loading up an old Pardini ISSF Target Pistol in SW .32 long. I was not given the loading data for it. I know most people shoot the 98grn HBWC over Bullselye of WST but im keen to use up what I have. Could anyone suggest a suitable and accurate load for me? I cant find anything on the net for this mix?

 

[rcmodel]

Vhitavouri load data shows N310 with that caliber.
http://www.lapua.com/en/products/reloading/vihtavuori-reloading-data/relodata/6/35

As does Lyman #49.

It appears to me N320 might be a little on the slow side for .32 target wadcutters.

Here is an old thread where one guy mentions using it.
http://www.thehighroad.org/archive/index.php/t-218225.html

rc

 

[NCsmitty]

Here's a link to the TargetTalk site which has a little info that may help.

http://www.targettalk.org/viewtopic.php?t=25682

Although no VV N320 data, M.D. Smith's reload page is a very comprehensive site.

http://www.reloadammo.com/32swlong.htm


NCsmitty

 

[Walkalong]

I am using N310. Being a blow back action a faster powder works better, but N320 should work. It is still fairly quick. Add a couple tenths to N310 data.

 

[JLDickmon]

Walkalong beat me to it.

The max load of N310 is 1.9 gr, keep going to about 2.2 of N320