Loading 32 Remington, I removed the rim, cut an extraction grove in 30/30 brass and necked up to 32. This brass is working great. Having problem finding .321 bullets. I slugged the barrel and it measured .321. I have a 8 MM mold that I size to .323, are these too big, will they cause dangerous pressure increase?
Can the Lee seizer in .314 be opened up using a rod and emery cloth? Any one had any experience doing this?
I have some .321 165 gr jacked bullets with the red plastic tips and they work well, would like to find a cast bullet for this.
Shooting in a mod. 14 with the twisted mag. tube so the points are not a problem.
Any help or suggestions will be greatly appreciated.
Thanks for you input.
Can the Lee seizer in .314 be opened up using a rod and emery cloth? Any one had any experience doing this?
I have some .321 165 gr jacked bullets with the red plastic tips and they work well, would like to find a cast bullet for this.
Shooting in a mod. 14 with the twisted mag. tube so the points are not a problem.
Any help or suggestions will be greatly appreciated.
Thanks for you input.