Locktite scope mount screws?

[Justin]

Hey all. I just finished installing a Jack Weigand scope mount on my 10/22. Is there any compelling reason for why I shouldn't Locktite those puppies in place?

Also, is it a good idea to Locktite the screws on the scope rings as well?

Thanks!

 

[Bartholomew Roberts]

Depends on how much shooting you do; but my policy has always been to apply blue loctite to anything with threads that goes on a gun. I have seen all kinds of parts work loose due to vibration from riding in vehicle, shooting, and various other causes... if you shoot it enough, it will work loose eventually.

 

[P95Carry]

Agreed - blue Loctite is good insurance and yet things will come off again when needed - with GOOD screwdrivers! I do forget to use it sometimes and often things stay done up - but loosening does seem to start unannounced and once started can progress real quick - usually too when at the range - and all tools were forgotten that day!

 

[Legionnaire]

Ditto. And make sure it is BLUE Loctite!

 

[MoeMentum]

Use blue, not red. If you don't use anything, it will get loose, thats a given.

 

[NMshooter]

Based on personal experiences I heartily agree with the other posters.

Besides, spending a nice afternoon chasing a wandering zero gets old...