Looking for a PRS chassis/stock for a 10/22

[mcb]

So my current 10/22 is far from factory original. In fact the only thing that is original is the receiver and bolt (firing pin and extractor new) and the trigger housing (fire control upgraded) and mag release parts. Just about everything else has been replace and upgraded at least once. But I am feeling the need to upgrade the stock for a fourth time. I have been using this rifle for NRL22 matches so a stock that is compatible with that game is what I need.


The current configuration using an old Butler Creek stock. Its decent stock but is a touch short in the LOP, not free floated and only has a sling stud on the forarm.

Some features I want:
-Free floated forearm for a bull barrel
-Long length of pull at least 14 inches, longer would be nice, adjustable or through use of spacers.
-Adjustable cheek riser
-Something to mount a bipod to better than a sling stud (M-Lok slots, integrate Picatinny or Arca Swiss etc). My current Atlas bipod has a picatinny clamp but I would be happy to upgrade to Arca Swiss clamp.

My leading candidate at the moment is:

KRG Bravo Chassis

A more economical stock would be the:

Magpul X-22 Hunter. Probably not as stiff but very easy on the wallet vs the KRG

And finally at the top end of my budget:

ORYX Precision Rifle Chassis.

So what are you guying running on your 10/22? The ones above are the ones that jumped out at me but I know there are a lot of other options out there and probably a fair number I am not even aware of. So if you have a favorite stock/chassis you are using for PRS style shooting with you 22LR please share.

 

[CraigC]

I put this one together for NRL22 matches but because of COVID, that never happened. It's a Ruger receiver, KIDD bolt and KIDD mid-weight barrel in a Nordic chassis with a Magpul PRS stock and MI free float tube. Trigger is a Ruger housing with Power Custom innards. Shoots 0.2"@50yds with Lapua Midas. I culled 27 squirrels from the property with it this year.

Thought seriously about doing another with the KIDD chassis.

 

[wiscoaster]

I have the Magpul stock on my 10/22 and I like it very much. But it doesn't meet all your criteria. I also have an Oryx chassis with a Howa 1500 rifle in it. I think the Oryx is kind of overkill for a 10/22, but what the heck, it'll do everything you want.

 

[mcb]

I have the Magpul stock on my 10/22 and I like it very much. But it doesn't meet all your criteria. I also have an Oryx chassis with a Howa 1500 rifle in it. I think the Oryx is kind of overkill for a 10/22, but what the heck, it'll do everything you want.

What requirements doesn't the Magpul meet? The cheek riser is the only thing I can think of but I believe they sell a couple different height cheek risers you can swap out. How ridged is the forearm on the Magpul? That is my biggest worry it that stock, that with a bipod on there torqueing it while pushing on the gun in some awkward shooting position it might end up deflecting and rubbing the barrel.

The ORYX would definitely be a bit overkill but I liked the look of it and it features and it's right at the top of what I would want to spend so for now its in the mix.

I am hoping some members might have some experience with KRG Bravo and can share because that seems like the best compromise between price and features, and it comes in red.

 

[wiscoaster]

What requirements doesn't the Magpul meet?

1) As you noted, the cheek riser is adjustable only by swapping fixed size risers (as I recall there are three??)
2) It's 100% polymer so won't be as rigid. That's not all that important with a .22 LR, but might detract from bipod stability.
3) It might not take your bull barrel. I noted mine was kind of tight with a sporter barrel. Have to check into that to make sure.
Sorry I can't be more specific, but mine's in storage at the moment and it's not handy here for closer inspection. I did it mainly for range tacticool, not for any serious precision.
Be advised you do have to buy the Oryx buttstock spacers separate, though they don't cost all that much.

 

[rabid wombat]

I have a Titan, but have not built it out. I do like your KRG.

https://victorcompanyusa.com/home

 

[mcb]

I have a Titan, but have not built it out. I do like your KRG.

https://victorcompanyusa.com/home

Thanks for the suggestion that was a stock I was not aware of and from a first look seems to check a lot of the boxes and is reasonably priced. I will definitely add it to my list under consideration.