Looking for brass weight

Status
Not open for further replies.
According to this post, one 45ACP fired brass with primer weights 95.98 grains. With 7000 grains per pound, one pound contains about 73 shells of the caliber. Note that brass with other headstamps may have different weight.
 
Different brands of cases weigh slightly different. You'll find 45ACP cases from approximately 89-95 grains each. At 89 grains each that would be 78 per pound or about 12.8 pounds per 1000. You'd have to count and accurately weigh for an exact count per pound.
 
To count them get a scale and use the info below



9mm, 59.46gr/ea, 117.7cases/#, 8.5#/1000

38spl, 68.06gr/ea, 102.8cases/#, 9.7#/1000

40s&w, 70.1gr/ea, 99.9cases/#, 10#/1000

.357mag, 78.3gr/ea, 89.4cases/#, 11.2#/1000

.45acp, 89.58gr/ea, 78.1cases/#, 12.8#/1000

.223, 95.28gr/ea , 73.5cases/#, 13.6#/1000

.44mag, 114.38gr/ea, 61.2cases/#, 16.3#/1000

50bmg, 865.26gr/ea, 8.1cases/#, 123.5#/1000

All weights are uncleaned fired cases with the primer remaining.

Individual case weights were derived using an average of mixed brass weights (except 50bmg)

So, if you picked up 8#?s of 45 brass: 8# X 78.1cases/# = 625 cases+/-

If you use 1gal ziploc freezer bags to store your brass, each (full) bag contains:

9mm, 15.6#, 1836cases
40s&w, 12.2#, 1219cases
45acp, 11.4#, 890cases
223, 11#, 809cases

or if you use the 5gal bucket method

9MM = 8500-9000 pieces
.40 S&W = 7000-7500 pieces
.45 ACP = 3800-4000 pieces

here is a few more


CASES per POUND:

.380: 145
.357 Sig: 96
.45 GAP: 86
.32: 168
10mm: 96
FN 5.7: 124
.25 acp: 260
.30 Luger: 120
.38 S&W: 120
.38 Super: 104
9mm MAK: 124
.45 Colt: 60
.30-M1: 100
.308: 40
.30-06: 35
7.62x39: 54
.50 AE: 48
.30-30: 52
 
Status
Not open for further replies.
Back
Top