Lube for sear/hammer surfaces

[CombatArmsUSAF]

What do you guys use to lube your sear and hammer cotact points?

 

[wally]

I like Dupont Teflon Multi-use Dry Film Lube. $5 a can from Lowe's.

--wally.

 

[sm]

I'm using ATF.

Havoline Dexcron III to be specific. I have a new pin point oiler and this is what I fill it with. I keep ATF in a Zippo Lighter Fluid can for all my gun lube needs.

 

[45R]

I use FP10

 

[wingman]

Fp10

 

[model 649]

Any other companies like Volquartsen specifically saying NOT to lube the sear/hammer interface? VQ claims it will cause a malfunction (they don't specify what, exactly). I use both CLP and Brownell's Action Lube+ with good results.
Josh

 

[HSMITH]

GREASE, usually Rig +P and sometimes Mobil 1 synthetic.

 

[stevelyn]

Brownell's Action Lube Plus applied with a toothpick.

 

[LeonCarr]

Another good one is a product called Slick 50 One Lube Grease, made by the same folks as the Slick 50 engine oil additive. You can usually find it at Wal-Mart by the wheel bearing grease. It is a teflon based grease, and works great on hammers, sears, bolt action rifle locking lugs, rotating bolts on Garand type weapons, etc. Good Stuff.

Just my .02,
LeonCarr

 

[AirForceShooter]

Mobil one for me

AFS