MBC 200grn Steeler HiTek 10mm load advice

[quaid]

I bought Missouri bullet company's 200 grain tcfp Steeler HiTek brinnell 18 coated bullets for loading in a stock glock 10 mm. Load data for this weight lead bullet and caliber is skimpy at best. The only data I found was Lee's manual, and I try not to rely on that one exclusively.

I have most of the usual powder candidates (TG/BE/BD/Unique/PP/AA9 etc)- and I'm leaning towards the 5+'ish grains Lee recommends of Win231.

Any input or experience with this bullet would be appreciated.

 

[Dudedog]

Don't own a 10 but Western load guide lists some loadswith 200 gr lead bullets for a couple different powders.

Guide for AA and ramshot powders

http://www.accuratepowder.com/wp-content/uploads/2010/09/WesternLoadGuide1-2016_Web-1.pdf

 

[Mr.Revolverguy]

Pistol Barrel Length Ammunition - Powder-Manual COAL Bullet Weight Bullet Type Velocity FPS Average Velocity FPS ES SD Energy Level Based on AVG
Para Elite Hunter 1911 6" AA#9 -11gr-Accurate Powder Manual 1.255 200gr Lead FP
1 Shot = 1201 1207 17 7 Full Power 646ft/lbs
2 Shot = 1199 Low
3 Shot = 1206
4 Shot = 1214
5 Shot = 1216 Hi

This load is safe in the pistol it was fired in and listed with this data. Use with caution and at your own risk. Start at 10.6 and work your way up.

 

[quaid]

The AA9 was just what I was looking for and worked perfectly. Thanks.