MBO IDP4-XD 200g RNFP and Titegroup

[Garnder]

Anyone have the start/max loads for this bullets/powder

500 of these just came in. My first lead bullets.

Been loading .45ACP for a few years with 230 FMJ and 4.4g Titegroup.

Any advice? I use Lee Dies and have a FCD if needed.

Thanks a bunch. Todd

 

[MissouriBullet]

Here's a link, not sure if Titegroup is in there, but other good data worth learning is -

http://www.thehighroad.org/showthread.php?t=545996

 

[Walkalong]

5.0 Grs of W-231 and no FCD.

Can't help with Titegroup. Not a Titegroup fan.

Welcome to THR.

 

[Garnder]

I did some more googling and found a couple of posts where some were using 4.5gr of Titegroup and have good success.

Its just the powder I have on hand and I have about 7 1/2 lbs left.

 

[jhansman]

My data shows 4.8 to 5.4 gr for that bullet and Titegroup; I load 5.1 gr. and get excellent results from my XD.

 

[Garnder]

Thanks J.

 

[Jech]

jhansman...what length bbl does your XD have? I'm shooting the same bullet from a 5" Tac model.