Sooo I'm getting a Ruger 10/22 and a Muzzelite stock for it, but someone told me to be 'careful' as some magazines for the Ruger 10/22 won't fit in the Muzzelite stock? Anyone know anything about which ones might give trouble and why? Also is the Ruger 10/22-FS a 16 inch barrel WITH the flash suppressor or without it? I don't exactly want to slap together a Muzzelite 10/22 if it's under legal length...
Muzzelite 10/22 stock and magazine compatability
- Thread starter greenr18
- Start date
- Status
zfk55
Member
With any Muzzlite... It can be made entirely workable and useable.
Open it up, remove the plastic actuator slide bar, replace it with steel, weld the steel trigger in place where the platic one was, lay two SS foil strips along the carrier rail and reassemble.
Its a perfectly useable system with a decent trigger pull with no plastic guts in it.
A SS Mini14 makes a great little truck rifle with this setup.
Open it up, remove the plastic actuator slide bar, replace it with steel, weld the steel trigger in place where the platic one was, lay two SS foil strips along the carrier rail and reassemble.
Its a perfectly useable system with a decent trigger pull with no plastic guts in it.
A SS Mini14 makes a great little truck rifle with this setup.
- Status
Similar threads
- Locked
