My Lab Radar pointers

Status
Not open for further replies.

emptybrass

Member
Joined
Jan 2, 2013
Messages
105
I got mine about a month ago but haven't had a chance to get to the range yet. I'm planning to carry it to the range Sunday afternoon so I put batteries in it and set it up in the back yard today to get aquainted with the controls. I took my 50 year old pump BB gun and put about 12 shots down range and the unit picked up every one of them. The range is an indoor range...do any owners have any tweeking advice that I might need to known when I set it up Sunday?
 
If you want to avoid worrying about battery life, I would strongly suggest an external USB battery pack. They sell one on their website that probably works just fine, but they can be purchased cheaper elsewhere. It's 30 bucks you won't regret spending.

Make sure you are using an SD card if you want to record all the "good stuff" that the unit is capable of recording. Only basic info is recorded without one.

Make sure you accurately set your barrel offset in the set up parameters. It can affect the accuracy of your results - read the manual for an explanation of that.

The screen saver time and the radar arm time are both set in the parameters to values you choose. I like to shoot slowly during load development but don't want to miss a shot either if the unit "de-arms" the radar before I take the next shot. Therefore, I set the arm time to 90 seconds and the screen saver time to 60 seconds. That way, when the screen shuts off, I know I have 30 seconds to get set and take the next shot.

The range I shoot at most often uses chicken wire for hanging targets on. I tried to use the unit at 10 yards with pistol loads and quickly discovered that it REALLY doesn't like chicken wire that close. (Yeah, 30 seconds of thought could have headed that one off.) It seems to be just fine at 25 yards and beyond, however.

Enjoy!
 
I have downloaded and read the Labradar user's manual, and I have a question: it appears that there should be no problem using the device with a Mac, either for data download or for firmware upgrades. However, as we all know, "should be" and "real life" can be two entirely different things. Has anyone tried using the Labradar with a Mac, and, if so, were there any problems?
 
Status
Not open for further replies.
Back
Top