Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need a new recoil spring, suggestions needed.

Discussion in 'Firearms Research' started by Demitrios, Aug 12, 2009.

Thread Status:
Not open for further replies.
  1. Demitrios

    Demitrios Member

    Joined:
    Aug 12, 2008
    Messages:
    615
    Location:
    Northern NJ
    I bought myself an RZ-10 and I'm not sure how may rounds have been put through it before I picked it up. I've been doing some research and 10mm apparently should get new recoil springs every few thousand rounds. Looking around it seems a #22 pound spring is the way to go, however I'm not sure if heavier might be in order or what. Also I've done some minor research on EFK firedragon springs and they seem to be quality. Any suggestions or info anyone can drop on me?
     
  2. Oro

    Oro Member

    Joined:
    Sep 22, 2007
    Messages:
    3,496
    Location:
    WA state
    I'd use what it came stock with unless you are having problems. Delta Elites came with dual-rate 23 lb. springs. I don't know about an RZ-10.

    Lots of folks use Wolff springs. I have begun to like ISMI springs, but I don't think they make a 10mm one for the 1911.
     
  3. Canuck-IL

    Canuck-IL Member

    Joined:
    Feb 15, 2005
    Messages:
    1,590
Thread Status:
Not open for further replies.

Share This Page