Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help IDing a pistol.

Discussion in 'Blackpowder' started by Azrael256, Aug 23, 2006.

Thread Status:
Not open for further replies.
  1. Azrael256

    Azrael256 Member

    Joined:
    Dec 24, 2002
    Messages:
    2,135
    Location:
    Dallas
    A friend of mine has a BP pistol which he asked me to identify. I wrote down all the pertinent information, and promptly lost the paper. I know, I'm an idiot.

    Anyway, it's a single-shot cap and ball affair. Everything works from under the barrel. The nipple, and, of course, the hammer work from just ahead of the trigger guard. The trigger guard itself is the mainspring. The sear is actually the end of the trigger. The trigger itself is so insanely light that a loud sneeze will touch the thing off.

    Anybody got any ideas?
     
  2. 4v50 Gary

    4v50 Gary Moderator Staff Member

    Joined:
    Dec 19, 2002
    Messages:
    18,524
    OK, we know it's an underhammer, but without markings or pics, we can't tell which one.
     
  3. Azrael256

    Azrael256 Member

    Joined:
    Dec 24, 2002
    Messages:
    2,135
    Location:
    Dallas
    Ok, got a name. It is a "Hopkins & Allen." It is one in a vast collection of this fellow's very strange firearms. I think he's actually collecting AOW stamps, and the byproduct is a bunch of wacky guns.

    Anybody know anything about them?
     
  4. Gatofeo

    Gatofeo Member

    Joined:
    Feb 17, 2004
    Messages:
    428
    Location:
    Remote Utah desert
    Hopkins and Allen manufactured these underhammer rifles and pistols back in the 1960s and 1970s. I don't recall that they lasted into the 1980s.
    They were said to be good rifles but never caught on. The underhammer concept is very old; some original underhammer rifles date to the 1820s, perhaps earlier.
    A collector of modern black powder arms might be interested in it, if it's in nearly unfired condition. If it's got any wear or tear on it, it likely doesn't have much value as a collectible so it may be shot without guilt.
    I used to see these rifles and pistols at gun shows in Spokane (Washington) in the early 1970s. Most folks preferred the Thompson Center Hawken-style rifle over them.
    As I recall, the Hopkins and Allen was made in .45 caliber but not .50 caliber.
    The Thompson Center was, back then, available in .50 caliber.
    Then, as now, everyone wanted the bigger bore. Even if they were going to do nothing more than hang it on the wall or shoot tin cans, they wanted the "Big 50" for bragging rights.
    Truth is, a .45-caliber ball will neatly kill a deer if applied within 75 yards, no more than 100 yards.
    Heck, until the Pioneers reached the plains and encountered big game like elk and grizzlies, most of them carried rifles of .40 to .45 caliber, shooting a round ball.
    From what I recall seeing, the Hopkins & Allen rifles were well made of good materials. If you pistol is not box-new, load it up with 20 to 30 grains of FFFG and a patched .445 ball (assuming it's .45-caliber). I remember reading many years ago that they were well-liked by black powder target pistol shooters for their accuracy.
    You may have a nice shooter on your hands, provided the bore is in good shape.
    Alas, too many people caught the black powder bug, grew weary of the cleaning required, then put their gun away uncleaned. Months or years later, the bore became a rusted, pitted mess.
    This still goes on today.
    Not long ago, in a pawn shop, I saw a nice Uberti-made 1860 Colt with badly rusted chambers and bore. Someone was too damned lazy to clean it after firing and now it's a wall-hanger, suitable only for decoration.
     
  5. Azrael256

    Azrael256 Member

    Joined:
    Dec 24, 2002
    Messages:
    2,135
    Location:
    Dallas
    This one is, fortunately, pristine. This fellow takes very good care of his guns. I'm glad to hear it doesn't have any significant value since he regularly shoots it.

    Actually, he regularly shoots most of his guns. He is unwilling to accept the notion that a gun should be kept for any kind of collector value unless half its weight is gold inlays. When I say he collects AOW stamps, I ain't kidding. Try having a shooting contest with a pocket watch .22... from inside the house. I was happy to miss the window sill.

    Thanks for the info.
     
  6. Old Fuff

    Old Fuff Member

    Joined:
    Dec 24, 2002
    Messages:
    23,908
    Location:
    Arizona
    At one time they were sold by Numrich Arms (www.e-gunparts.com). I believe they still have parts and excessories. Besides pistols, they made carbines and rifles.
     
Thread Status:
Not open for further replies.

Share This Page