ironworkerwill
Member
I loaded some 7-o8 ppu brass with 13gr of Trail Boss and 139gr bullets. They shot fine. I also had some full power loaded with a good moderate load of RL17 also shot great. Other than powder all things are the same. Also Fed 210 pimers was used.
The odd thing is: when I ran the full power loads through the FL die the pin knocked the primer out as normal but primer seems to get sucked back up in the low power Trail Boss loads. I had to raise the ram a second time on almost every one of the TB loads to make the primers drop off the pin.
The odd thing is: when I ran the full power loads through the FL die the pin knocked the primer out as normal but primer seems to get sucked back up in the low power Trail Boss loads. I had to raise the ram a second time on almost every one of the TB loads to make the primers drop off the pin.
Last edited: