Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New to reloading need help

Discussion in 'Handloading and Reloading' started by rickyford2, Dec 17, 2007.

Thread Status:
Not open for further replies.
  1. rickyford2

    rickyford2 Member

    Joined:
    Dec 15, 2007
    Messages:
    126
    Location:
    Maryland
    I know NOTHING about reloading can some one tell me were to start:uhoh: I would like to know how to reload 270win
    Were do I get primers and gun powder and bullets? How much is it going to cost to start?

    Ricky
     
  2. Shoney

    Shoney Member

    Joined:
    Jan 1, 2003
    Messages:
    1,292
    Location:
    Transplanted away from MT
    Start by reading the "Stickies"at the beginning of this forum.

    After reading, tell us what weapon/cartridges you are loading for, and the numbers of rounds you normally shoot per week/month/year, and a budget you wish to dedicate to relaoding. Then we can give you a better idea on the equipment you will need.

    Good Shooting!
     
  3. rickyford2

    rickyford2 Member

    Joined:
    Dec 15, 2007
    Messages:
    126
    Location:
    Maryland
    HELP i need more info please

    Ricky
     
  4. rickyford2

    rickyford2 Member

    Joined:
    Dec 15, 2007
    Messages:
    126
    Location:
    Maryland
    ANyone

    Ricky
     
  5. rickyford2

    rickyford2 Member

    Joined:
    Dec 15, 2007
    Messages:
    126
    Location:
    Maryland
    Can some one please help me?

    Ricky
     
  6. Shoney

    Shoney Member

    Joined:
    Jan 1, 2003
    Messages:
    1,292
    Location:
    Transplanted away from MT
    Ricky: READ THE STIKIES, they have most if not all thei info you seek!

    You did not say how much you shoot, or if you will be adding any other weapons/cartridges to the mix.

    For one rifle cartridge you can go with a minimum hand held press, or a single stage press. Or if you have little more in a budget, you can get a turret press. You definitely do not need a progressive press until you start shootin close to 1000 rounds per month.

    I loaded for a wide varitey of rifle and pistols on a single stage press for over 35 years. When I got into competitive pistol shooting, I needed a progressive and now won tow of them, but still keep my single stage presses for certain applications.

    Good Shooting!

    Where to buy (are ya ready) I'm sure I left out a few,
    http://www.midwayusa.com/
    http://www.brunoshooters.com/catalo...g_frameset.html
    http://www.midsouthshooterssupply.com/
    http://www.grafs.com/
    http://www.lockstock.com/
    http://www.natchezss.com/
    http://www.leeprecision.com/
    http://www.tntreloading.com/
    http://www.tntreloading.com/index2.ivnu
    http://www.fmreloading.com/
    http://www.kinneman.com/catalog/whole_catalog.html
    http://www.neconos.com/
    http://www.wideners.com/
    http://www.atozreloading.com/indexns.html
    http://www.sinclairintl.com/
    http://www.snowcrest.net/oldwest/
    http://www.clarkcustomguns.com/linksammo.htm
    http://www.forsterproducts.com/Pages/main.htm
    http://www.wholesalehunter.com/product/search.htm
    http://www.starlinebrass.com/
    http://www.blue-star-inc.com/
    http://www.bhshooters.com/
    http://www.gibrass.com/
    http://www.southernbellebrass.com/contact.htm
    http://ammunition-reloading.virtualave.net/products.htm
    http://www.reloadingcentral.com/
    http://www.georgiaprecision.com/order.htm
    http://www.customreloads.com/
    http://www.tyko.com/
    http://www.huntingtons.com/
    http://www.ballisticproducts.com/
    http://www.precisionreloading.com/
    http://www.midsouthshooterssupply.com/
    https://www.midwayusa.com/prodsearch.dll/category
    http://www.midwayusa.com/
    http://www.midwayusa.com/home.html
    http://www.cabelas.com/texis/script...bFALL1998AAAnAA
    http://www.gamaliel.com/
    http://www.rmss.com/
    http://www.championshooters.com/
    http://www.pla-net.net/~rcomer/ammo.htm
    http://www.buffaloarms.com/baco2.htm#39
    http://www.z-hat.com/Cylinder.htm
    Bullet manufacturer
    http://www.angelfire.com/stars/light...ets/index.html
    http://www.barnesbullets.com/
    http://www.bearcreeksupply.com/
    http://www.beartoothbullets.com/index.htm
    http://www.beast-enterprises.com/slugs.html
    http://benchrest.com/bib/proven.html
    http://www.bergerbullets.com/faq.htm
    http://www.berrysmfg.com
    http://www.bonusbullets.com/
    http://www.brassmanbrass.com/monthlyspecials.html
    http://www.bushwhackerbulletcompany.com/
    http://www.carrollbullets.com/
    http://www.carrollsweb.com/gunshop/h...t_bullets.html
    http://www.castperformance.com/
    http://www.castperformance.com/Default.htm
    http://www.cheycast.com/
    http://www.goldenwestbrass.com/
    http://www.hawkbullets.com
    http://hometown.aol.com/lishsu/home.html
    http://www.hornady.com/
    http://www.jdcomponents.com/prices/prices.html
    http://www.lapua.com
    http://www.laser-cast.com/
    http://www.maadigriffin.com/
    http://www.magnusbullets.com/index.html
    http://www.masterblastersbullets.com/
    http://www.meisterbullets.com/index.asp
    http://www.mkcb.com/
    http://www.montanagoldbullet.com/
    http://www.neihandtools.com/
    http://www.nosler.com/
    http://www.NWARMS.com/
    http://pennbullets.com/
    http://www.phoenixbullet.com/products.htm
    http://www.precisionbullets.com/products.html
    http://www.precisiondelta.com/
    http://www.proshootpro.com/
    http://www.rainierballistics.com/
    http://www.remington.com/products/am..._&_handgun.asp
    http://www.scharch.com/r-bullets.htm
    http://www.sierrabullets.com/
    http://www.shilen.com/bullets.htm
    http://www.shooterstore.com/acb/web..._ID=345&DID=108
    http://www.speer-bullets.com/
    http://www.superiorammo.com
    http://www.swiftbullets.com
    http://www.thebulletbarn.com/
    http://www.theshop.net/chas/sureshot/products.htm
    http://www.winchester.com/products/c...s/bullets.aspx
    http://www.wolfbullets.com
    http://www.xtremebullets.com
    http://www.zerobullets.com/
    __________________

    powder mfg.
    www.accuratepowder.com
    www.alliantpowder.com
    www.goexpowder.com
    www.hodgdon.com
    www.norma.cc
    www.pyrodex.com
    www.lapua.com/reloading.html
    www.westernpowders.com


    surplus powder
    http://powdervalleyinc.com/
    http://www.gibrass.com/gunpowder.html
    http://www.patsreloading.com/patsrel/prices.htm

    used brass
    http://www.chestnutridge.com/products/brass.asp
    http://www.southernbellebrass.com/rifle.htm
    http://www.cheyennebrass.com/
    http://www.scharch.com/
    die manufacturor
    http://www.leeprecision.com/
    http://www.hornady.com/
    http://www.rcbs.com/
    http://lewilson.com/About_L_E__Wils..._e__wilson.html
    http://www.neiljones.com/
    http://www.forsterproducts.com/Pages/main.htm
    http://www.reddingreloading.com/
    __________________
     
  7. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Well, that ought to keep him busy for awhile! :D

    [​IMG]
    rcmodel
     
  8. goon

    goon Member

    Joined:
    Jan 20, 2003
    Messages:
    7,246
    I don't know if ebay still sells reloading presses or not but that is where I got mine. It cost me about $25. Other places to watch would be the classifieds on here and in the newspapers. I'd try to find either an RCBS or a Lyman press to start with. With many people needing christmas money and with taxes coming up soon, this might be a good time to put a "wanted" ad out too.
    For dies I would also go with Lyman or RCBS for handgun calibers. For rifle calibers I would choose Lyman. RCBS decapping stems seem to have the expander ball screwed on too tight from the factory and that strips the threads out. I haven't had this problem with Lyman dies. For most rifles regular full length dies will work fine but some lever actions, pumps, and semi-automatics require small base dies. I have never needed them but some guys on here have. You'll also need case lube. I prefer RCBS case slick.
    You'll need a scale. Again, RCBS or Lyman should do fine.
    For reloading components, I would go to a trusted local shop and start asking questions. It would also help you out with other questions you have. Most importantly is that it might put you in contact with a real live handloader who can help you out. Places like Midway are great for components and harder to find specialty tools but IMO you should wait until you really know what you need to order from them - maybe on your second reloading purchase. IMO there just isn't any substitute for one on one help from an experienced reloader.
    You'll want a powder measure eventually but you could get by with a clean bowl and a teaspoon for awhile. Use it to dispense powder to your scale. But if you can afford the measure it would be way better to just start with it.
    Most important, get a manual and read it before you do anything. Then get another manual and read it too.
    Then ask us more questions.
     
  9. K3

    K3 Member

    Joined:
    Nov 14, 2006
    Messages:
    1,508
    Location:
    Looking through the scope at a coyote
  10. rickyford2

    rickyford2 Member

    Joined:
    Dec 15, 2007
    Messages:
    126
    Location:
    Maryland
    Thanks for the info guys and rcmodle yes i'll be bussy for a while

    Ricky
     
Thread Status:
Not open for further replies.

Share This Page