1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

norma 200 or 201 experiences

Discussion in 'Handloading and Reloading' started by PonyKiller, Aug 6, 2013.

  1. PonyKiller

    PonyKiller Member

    Oct 6, 2011
    Southern New Jersey
    Anyone Familiar with either of those norma powders for reloading a 30-30? I've seen their compatable, and most importantly available. They aren't the usual suspects for 30-30 loads, I'm still compiling parts for my first batch of loads ever. I'd rather not blaze new ground on the first time out. I've got bullets, brass, dies on the way now it's the hunt for the powder and primers.
  2. Kerf

    Kerf Member

    Feb 7, 2008
    Western Missouri, south of liberty
    Always liked the Norma line of powders, especially the N205, (which I don't think they make any more), since it was slower than 4831 and really metered well through the powder measure.
    I'd stick with the N201, which has about the same burn rate as 3031 which has always worked well in the 30-30. N200 would be too fast for the 30-30.
    Next choice would be 4895 or 4320, if you can get your hands on some of those. But the N201 would fill the bill nicely

    Good luck with your reloading,


Share This Page