P238 (Colt Mustang)

[Rubikees]

Ok, that little lever that you have to push down to install the slide finally caught me. I slipped and over extended it to a point that it will not return up right. How in the heck do you get it back to the up right position?

 

[ngnrd]

According to Sig, you have to send it back to the factory...

link

note: depress the ejector “A” to clear slide.* The ejector should be depressed only far enough to provide clearance for the slide during assembly. Depressing the ejector beyond the point required for reassembly may cause the ejector to bind in the frame. Should this occur, the ejector will not return to the normal position. This condition is not correctable at the operator level - the pistol will have to be returned to SIG SAUER for repair.

 

[Rubikees]

Well never tell a Mechanical Engineer that he can't fix something. I found a YouTube instruction and got it apart and back together. Everything is working properly so everything is well in the world.

 

[ngnrd]

Sweet. Gotta love gettin' it done yourself.

 

[rcmodel]

Sometimes, a simple dental pick will rectify certain situations you can't get your finger on too.

rc