Pellet gun scope problems!

[Pth22]

I recently bought a gamo varmint hunter hp and I have one problem
The scope keeps coming off the gun from the recoil help me resolve this issue

 

[Ohen Cepel]

Check to make sure parts fit together the best they can (smooth things out, make them flatter where possible, etc to get max contact area). Then tighten it down (torque equally if possible), use a little blue Lok Tite on the screws this time.

Oh, and if there is a spot on the rifle to keep it in place be sure it is snug against it.

 

[rcmodel]

Put Blue Lock-tight in the receiver grooves too.

It will keep the clamps from slipping under recoil.

PS: If the scope is just jumping straight up off the gun, your mount clamps don't fit right.
You may need better rings.

rc

 

[entropy]

Pellet guns scopes (spring air and piston guns) must be mounted more securely than scopes for most rifles, except the Big Magnums.

 

[Pth22]

Thnx ill try loc-tite!

 

[rodinal220]

If the problem persists,look at BKL scope mounts.They are great for spring-piston applications.

 

[ZVP]

go to Pyramid Air Co And buya scope ring setwith a built in stop,
HTH