Powder Temperature Sensitivity

Status
Not open for further replies.

Jayhawker

Member
Joined
Jan 26, 2003
Messages
240
Location
Southwest Kansas
What is the issue with powder temperature sensitivity? Is it that the position of impact may be affected or the group size or both?

Pete
 
Temperature sensitive powder (like AA #5) will cause chamber pressures to increase as the ambient and cylinder temperature increases. If you are at or near the maximum charge weight this becomes a real problem...
 
What is the issue with powder temperature sensitivity? Is it that the position of impact may be affected or the group size or both?

Pete,

Primarily point of impact (high temps = higher velocity, low temps = lower velocity), although group size is also affected due to the velocity being different than it was during your load development.

Don
 
Temperature sensitive powder (like AA #5)


Bushmaster makes a good point. Personally, I like AA # 5, but I do not shoot it at max, (well, one load I do) and all my loads with it were worked up in the Alabama heat.
 
Status
Not open for further replies.
Back
Top