Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pro-Shot Pull-Through Jags with Otis Flexible "Rods"

Discussion in 'General Gun Discussions' started by nyrifleman, Apr 18, 2012.

Thread Status:
Not open for further replies.
  1. nyrifleman

    nyrifleman Member

    Joined:
    Apr 2, 2010
    Messages:
    231
    Location:
    Chenango County, NY
    I was wondering if these two products are compatible:

    Otis cleaning rod:
    http://www.otistec.com/pc_product_detail.asp?key=84609699E2014082B437C8DFFF29C9C4

    Pro-Shot pull-through jag:
    http://www.proshotproducts.com/Tactical-Line-Replacement-Brushes--Jags-_c_165.html

    The pull-through jag is a neat idea, but I'm worried that the pointy tip on it would prevent it screwing into the Otis cleaning rod, and I don't really want to buy the Pro-Shot flexible rod, because it seems overpriced. Anybody have first hand experience with these products?
     
  2. Tom609

    Tom609 Member

    Joined:
    Oct 27, 2006
    Messages:
    522
    Location:
    NJ Pinelands
    It looks like it uses the same 8-32 thread. I love the Otis flex rods and use them on everything from .223 to 7.62. I use generic slotted tips, as well as regular caliber-specific bore brushes. I'll also wrap a small patch around the brush and use it like a jag. The Otis kits are overkill as far as I'm concerned, but the flexible rods are reasonably priced by themselves and work with all standard brushes and attachments. I have one on the bench and keep another one in my range box.
     
  3. gunnysmith

    gunnysmith Member

    Joined:
    Jul 8, 2004
    Messages:
    113
    Location:
    Wyoming
    I don't use cleaning tools that can cause uneven wear at the muzzle.
     
  4. hardluk1

    hardluk1 member

    Joined:
    Mar 27, 2009
    Messages:
    4,405
    Location:
    nc mountains
    I bought felt pellets from brownells for cleaning. VFG is one brand . 20/20 concepts is another.-http://20-20.8m.com/newprod1.html

    Take a heavy piece of weedeater line and heat and flat'n one end. Slide a pellet over line use your cleaner or lube and pull threw. Works very good. You can buy these with or without bronse fibers in them to for cleanning copper or plastic out. No metal jags, cable or rod to hurt barrel and really works. You can buy a jag from VFG for use with a quality clean rod too for push to clean .
     
Thread Status:
Not open for further replies.

Share This Page