Pull trigger while LBS inside chamber

[Khadimkhan]

Hi all,
I pull the trigger if my vepr molot 5.56 while brass made laser bole sighter inside chamber.my question is that ,after that I am worry and concerned about damage to fire pin ,but after that gun working properly,(I have fire rounds) ,should I worry or not.

 

[Robert]

Hopefully the brass bore sighter should be softer than the firing pin. If it works when you shot it, I wouldn't worry about it.

 

[5whiskey]

I suspect the rifle is fine. You'll know when you take it to the range

 

[Laphroaig]

Is your bore sighter OK? That was a solid impact to an electronic gizmo.

 

[Khadimkhan]

Is your bore sighter OK? That was a solid impact to an electronic gizmo.

Yes

 

[Riomouse911]

You should be ok. Some of the steel-cased rounds those AK derivative guns were designed to shoot have rock hard primers, those pins are tough. An unintentional whack on the brass boresighter shouldn't cause damage to the gun.

Stay safe.