Tomahawk674
Member
I've read a lot of posts about fixing loose arbors; drilling out the securing pin and re-securing the arbor. I read that the arbor has a shoulder that prevents the arbor from being screwed in too far.
My question is, do you guys know if there is room for at least half a turn to drive in the arbor? My arbor has stretched by several thousands, no wedge fits tight and the barrel gap is massive. This is on a steel frame.
I had JB welded a shim in the front of the arbor slot that fixed the issue but it just fell out after a couple of years of use. Looking at an alternate fix.
My question is, do you guys know if there is room for at least half a turn to drive in the arbor? My arbor has stretched by several thousands, no wedge fits tight and the barrel gap is massive. This is on a steel frame.
I had JB welded a shim in the front of the arbor slot that fixed the issue but it just fell out after a couple of years of use. Looking at an alternate fix.