archer1214
Member
Ok, I have read the other posts,mainly the one about neck tension on .223 bullets loaded for AR's. It all made sense to me ,so I checked the expander ball dia. on my die and it measured .224. OK,so I took it out and chucked it up in my drill press and proceeded to sand in down using fine grit paper on a tounge depressor . Worked it till I got down to .218 and figured that's enough. So I sized 50 brass then checked the length,some need to be trimmed. Only thing is, the pilot bushing on my RCBS trimmer is .224,lol :banghead:. So I'm guessing I need to work that down too?
Thanks,Archer
Thanks,Archer