I'll tell ya what! I got the idea from a few guys on this forum that love the stuff. I loaded up 100 rounds along with 100 AA#2 and went on down to the range. I first fired off the AA#2. Great results! I then tried 4 magazines with 5 loads each of the N320. Results were excellent! Actually better that the AA#2. I'n talking 33 feet with 1` 1/2 - 2" groups. I loaded some more for saturdays trip to the range..so I can see if it's a fluke..or my God given talent...or just a great load!
RCBS Powder measure
- Thread starter chrt396
- Start date
- Status
3leggeddog
Member
Uniflow + Baffle
I’m using a Uniflow with a baffle, I found that if I extended the cut out “slots” on the baffle another ¼ in. to allow more power under the baffle. This really improve the consistency. I’m using , W-231, Bullseye, Blue Dot, and Unique….
I’m using a Uniflow with a baffle, I found that if I extended the cut out “slots” on the baffle another ¼ in. to allow more power under the baffle. This really improve the consistency. I’m using , W-231, Bullseye, Blue Dot, and Unique….
I'll gladly pay $10 more for braggin' rights!Yep, AA #2 is very good, but N320 is excellent.
Do you need the difference? That is up to you. Will you pay the difference? Up to you as well.
mrbro
Member
For some real crunching try 4064.
spcrobbins
Member
I seem to have an older uniflow powder measure because I ordered a baffle and it wouldn't fit and at the same time, RCBS sent me a cap because mine was lost and it was too big. Anybody aware of a smaller uniflow?
no smaller uniflow
A smaller Uniflow doesn't exist. I have Uniflows and a little seen DU-O which has an even larger diameter hopper. The only measure in the RCBS line up that would have a smaller hopper that wouldn't accomodate the baffle is the newer product called Little Dandy. I don't have nor have ever seen one, but if you go to the RCBS support site and download the parts book 3rd edition it has exploded diagrams that might help you determine whether you have one of these Little Dandy measures.
A smaller Uniflow doesn't exist. I have Uniflows and a little seen DU-O which has an even larger diameter hopper. The only measure in the RCBS line up that would have a smaller hopper that wouldn't accomodate the baffle is the newer product called Little Dandy. I don't have nor have ever seen one, but if you go to the RCBS support site and download the parts book 3rd edition it has exploded diagrams that might help you determine whether you have one of these Little Dandy measures.
spcrobbins
Member
smaller hopper on Uniflo
I do have a uniflo and it is smaller. Maybe they made one along time ago and they just don't make that one anymore. I will cask RBCS
I do have a uniflo and it is smaller. Maybe they made one along time ago and they just don't make that one anymore. I will cask RBCS
medalguy
Member
Make a baffle that fits your powder measure properly. Here's a link to a site with patterns so you can just take a piece of aluminum flashing available at any hardware store and tin snips and go to work. Takes about half a minute to cut one out:
http://www.ray-vin.com/tech/hack/baffle.pdf
http://www.ray-vin.com/tech/hack/baffle.pdf
- Status
