Hello,
I’m new here on THR so be easy on me!
I have a question on the RCBS Precision MIC. It is my understanding
this will tell you where the ogive/ojive is in relationship to your lands, thus
giving you a setting to set your bullet jump.
I cannot understand this if ALL bullets ogive are different from mfg to mfg and weights.
I have these ogive measurements checked with Hornady Comparator tool:
1) Sierra 168gr HPBT Match = .592
2) Mfg Un-known 190gr SP = .771
3) Mfg Un-Known 180gr SP = .616
4) Hornady 178gr AMAX = .699
Am I not comparing apples to apples or how will the RCBS tool be a “Use for All” tool when you have a difference in all bullets?
I’m new here on THR so be easy on me!
I have a question on the RCBS Precision MIC. It is my understanding
this will tell you where the ogive/ojive is in relationship to your lands, thus
giving you a setting to set your bullet jump.
I cannot understand this if ALL bullets ogive are different from mfg to mfg and weights.
I have these ogive measurements checked with Hornady Comparator tool:
1) Sierra 168gr HPBT Match = .592
2) Mfg Un-known 190gr SP = .771
3) Mfg Un-Known 180gr SP = .616
4) Hornady 178gr AMAX = .699
Am I not comparing apples to apples or how will the RCBS tool be a “Use for All” tool when you have a difference in all bullets?