RCBS Pro 2000 Powder Measure

Status
Not open for further replies.

jediagh

Member
Joined
Feb 17, 2011
Messages
79
I know the RCBS Pro 2000 Automatic Indexing Progressive Press (Model 88882) comes with the Uniflow Powder Measure with Micrometer Adjustment Screw.

My question is does it come with the both the large and small drum like the competition power measure here:
http://www.grafs.com/retail/catalog/product/productId/14439

Or does it just include 1 of the drums and micrometer?
Thanks!
 
It depends. When I got mine (2000) it did but I understand that during the time frame since then occasionally it does and occasionally it does not.

Check the package to be sure. Mostly I run the small micrometer in mine.
 
The powder measure is a Uniflow and has been out for many years, so there are a lot of them on the used market for very reasonable prices. If your measure does not come with both the large and small drums, just pick up a second measure used with the drum you don't receive. This option doesn't cost much, because the measures go relatively inexpensively and gives you a "pre-setup" measure for both the large and small drums, a bit more convenience.
 
My Pro 2000 also came with a large and small cylinder for the Uniflow. It came with every attachmnet you could imagine for the Uniflow. I bought mine in June of 2011.
 
jediagh, Not to worry...it comes with both....always. In the owners manual page 3 there is "unpacking instructions" where it lists the parts in each package. In parts bag #3 and Bin #2, You will find it lists both sizes of micrometers, drums, etc. Look for yourself HERE. Page 3.
 
Status
Not open for further replies.
Back
Top