Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

re-doing my carry... input appreciated

Discussion in 'Handguns: Autoloaders' started by dakotasin, Dec 3, 2008.

Thread Status:
Not open for further replies.
  1. dakotasin

    dakotasin Member

    Joined:
    Dec 26, 2002
    Messages:
    4,777
    Location:
    Transient
    i work in a professional environment and wear a suit about 20% of the time, and a tucked-in button down shirt w/ tie the other 80% of the time. my normal carry-piece is currently a smith j-frame in an iwb galco holster. it has done pretty well for me until recently.

    one of the girls asked me 'what is that on your side?' - she had noticed the clip to the belt, and then noticed, presumably, the bulge from the cylinder.

    so i went gun shopping last night and came across some kahrs. i am thinking of switching over to one of the kahrs (probably a 40, but chambering isn't important at this time).

    is there a carry system that will disappear better than my j-frame/galco set up? will a kahr pm-series conceal as well as a kahr cw-series? thinking of switching to an auto because they are a little thinner than a revolver.

    looking for a little help, here. thanks for your input!
     
  2. rbernie
    • Contributing Member

    rbernie Member

    Joined:
    Jan 21, 2004
    Messages:
    20,450
    Location:
    Norra Texas
    I work in a similar environment, only my office would likely prove intolerant of CCW. For that reason, I off-body carry in a day planner. It is simply far less likely to get 'outed' than any IWB setup.

    And, no - I have never left my day planned behind or lost track of it. It's really not hard to keep up with.
     
  3. Mad Magyar

    Mad Magyar Member

    Joined:
    Jun 8, 2005
    Messages:
    1,967
    Location:
    Arizona
    Well, the easy answer would be for you to leave your coat on most of the time. No, okay. You realize that cylinder bulge will always be a factor. Choosing a Kahr or any other compact, perhaps a slim 9mm are a good choice for your IWB carry. For me, since I'm not too fond of IWB, I'd carry a lghtweight.380 pistol in my SS pocket and leave the keys/change in your other. That will work....:)
     
  4. jehu

    jehu Member

    Joined:
    Mar 21, 2005
    Messages:
    396
    Rohrbaugh R9 is the gun you seek. It will disappear in a pocket. IWB, or in a Smart Carry rig.:rolleyes:
     
  5. esq_stu

    esq_stu Member

    Joined:
    Mar 30, 2005
    Messages:
    966
    Location:
    Michigan
    I wear loose-fitting pants with adequately sized pockets and use a pocket holster for my J-frame and PM9.

    I find the J-frame carries easier than the PM9 that way and the PM9 carries easier on the belt.
     
  6. BornAgainBullseye

    BornAgainBullseye Member

    Joined:
    Oct 15, 2008
    Messages:
    273
    Location:
    SW Georgia
    Is that a gun....? or are you just happy to see me? Just kidding, I would not change a thing. Did she call you out? Was there any to say " it is my GPS" or some of the sort. Are you in a no print state? If you want to buy another then go ahead, but Id choose a revlover over a compact 9mm or .380 auto any day of the week. Is it a problem in your AO for your co workers to know you are CCW?
     
  7. WC145

    WC145 Member

    Joined:
    Oct 28, 2006
    Messages:
    2,255
    Location:
    Maine
    Get a good ankle holster for your j-frame. I used to carry a P3AT in the waist band of my scrubs but switched to a j-frame in a Cobra Gunskin ankle holster. No trouble keeping it hidden and no issues like you ran into. It'd be a lot cheaper than buying another, unless you just want another one. If that's the case I like my CW9 and it is easily concealed but the PM series is smaller and lighter than the CW. Of course, they cost more too.
     
  8. ZombieKiller

    ZombieKiller Member

    Joined:
    Sep 28, 2008
    Messages:
    243
    + 10. Ankle holsters are just stinkin cool man.
     
  9. h-word

    h-word Member

    Joined:
    Dec 31, 2007
    Messages:
    110
    Location:
    Michigan
    Ankle holsters are great... until you need your gun in a hurry. Think about it in a "stick-up" situation. "Excuse me violent criminal, I would like to tie my shoe."
     
  10. ZombieKiller

    ZombieKiller Member

    Joined:
    Sep 28, 2008
    Messages:
    243
    ANY sudden movement, even hand to hip, would cause a hardcore criminal to shoot
     
  11. CDH

    CDH Member

    Joined:
    Aug 18, 2005
    Messages:
    245
    Location:
    South Texas
    -10 on the ankle holster. Truly a bad idea for self-defense.

    I recently bought a Rohrbaugh R9S Stealth, and it's immediately become my favorite "deep conceal" pistol.
    If you can't conceal the R9, you're naked.
     
  12. dakotasin

    dakotasin Member

    Joined:
    Dec 26, 2002
    Messages:
    4,777
    Location:
    Transient
    no - she just asked what it was. i redirected the conversation, and it was forgotten.

    no, there really wasn't. i used to carry a blackberry on my belt, but no longer do, and i don't have anything else on my belt.

    no.

    why is that? if it is merely for chambering, the gun will most likely be chambered to 40, not a 9 or 380, though i have not ruled those out, either.

    no, i don't think so. i doubt any of my co-workers would care a whole lot, but i'd rather they didn't know/find out i carry at work. it is no secret that i have guns, and that my family thinks a few hours blasting away is a fantastic family outing, but that shouldn't be misconstrued into thinking i want my employer and co-workers to know i carry at work. my workplace has no policy on guns, and i don't want to be the reason a gun policy is put into place.

    the dayplanner could work - i might check into that a little further.

    i already have an ankle holster for the smith, and don't like it very much.

    if i am going to re-visit my carry method, is milt sparks still the gold standard for concealing handguns in an iwb rig? w/ a tucked-in shirt?

    thanks fellas - appreciate the comments.
     
  13. WC145

    WC145 Member

    Joined:
    Oct 28, 2006
    Messages:
    2,255
    Location:
    Maine
    Consider the KISS principle. You want to carry a gun without anybody knowing it, correct? Take the simplest route, you already own it. If draw speed isn't much of an issue go with what meets the need and learn to cope. I'm not a big fan of ankle holsters but it works in my situation and works well, so that's that. You get used to it.

    Keep in mind, if carrying a gun was always easy and comfortable everybody would be doing it.
     
  14. IMTHDUKE

    IMTHDUKE Member

    Joined:
    Aug 27, 2004
    Messages:
    1,022
    Location:
    Sweet Home Alabama
    Carry this in pocket, coat pocket...vest...etc.

    [​IMG]
    Of course, in a good pocket holster.
     
  15. Prince Yamato

    Prince Yamato Member

    Joined:
    Aug 16, 2006
    Messages:
    4,409
    Location:
    Texas
    You need a true "inside-the-pocket" gun. So basically, a Kel-Tec p3AT, p32, or similar sized weapon. Revolvers and baby Glocks are only "pocket guns" if you are a large person and wear super-stitched pants.
     
  16. M203Sniper

    M203Sniper member

    Joined:
    Mar 23, 2008
    Messages:
    465
    Location:
    I live in Arizona
    I just saw this "Shoulder Holster" to me it looks like a belly band under your arms. I thought i might try it - the price is pretty good at $40.00 and it doesn't LOOK like a holster. Might work well with your revolver.


    http://www.activeprogear.com/index.html

    [​IMG]


    BTW; I LOVE the R9. I can't wait to get my hands on one, that and a good Wallet holster. It would set up CCW for LIFE!

     
  17. Zeede

    Zeede Member

    Joined:
    Mar 22, 2007
    Messages:
    267
    Location:
    Los Angeles, CA
    I'll be looking into a Smart Carry as it seems to be a great way to conceal while in business attire. If that doesn't work than the belly band up under your armpits would be an option too.

    Cameron
     
Thread Status:
Not open for further replies.

Share This Page