I recommend you get a single-stage press for your first tool...very versatile and inexpensive to switch calibers, excellent for learning how to reload without getting into trouble. You can probably pick one up second hand for $30 to $40 at a gun show or gun store. One made of cast iron is recommended over an aluminum frame for rifle case re-sizing...less "springy". You can pick up a new cast-iron Lee for about $60 at Midway. Cast-iron turret tools are fine also, but more expensive. Lee dies are both excellent and inexpensive, or you may be able to pick up other makes second hand...light rust on the outside is OK, but not on the inside of the sizing die.
Get one powder for all handgun...Win #231 is excellent. Get a good beam powder measure...you can trickle final grains of powder from a cartridge case. Load with an experienced friend atfirst...