I have a 788 in 44 mag and it never ejected just right if. Under range conditions I would rack the bolt easy and all was fine but if I quickly racked it like I would if I needed a follow up shot in the field, the spent casing would follow the bolt back under the action then just fall in the action. I have since found that the ejector has had the end broken off it. Never having had a 788 what is left looks fine and you really need to look to see that it is rough and has been broken.
I’ve tried to use the schematics to see what the part looks like but with no luck. Dose anyone have a 44 or 30/30 they can take a photo of the ejector so I can see what it should look like.
What is the different between the 44 one and the others.
I do have access to a friend with a lathe do you think it can be fabricated round right now it looks like its round then square.
Any help or ideas would be great thanks
I’ve tried to use the schematics to see what the part looks like but with no luck. Dose anyone have a 44 or 30/30 they can take a photo of the ejector so I can see what it should look like.
What is the different between the 44 one and the others.
I do have access to a friend with a lathe do you think it can be fabricated round right now it looks like its round then square.
Any help or ideas would be great thanks