Saeco Lubrisizer Top Punch .308/.309

[blarby]

I'm trying to ascertain the correct top punch to use in a Saeco Lubrisizer, for use with flat-top .308/.309 bullets from a lyman mould.

Not having a lot of luck- any help would be appreciated !

 

[GP100man]

Blarby

Here`s what I do with the Lee boolits I get a TP that is close or a bit larger than desired .

Clean the TP cavity ,then fill with hot glue (for temporary fix) or JB weld for a more permanent arrangement.

Coat the boolit with a release agent(oil or boolit lube works) center it either in the press or eyeball it as best ya can & let it sit, wa la custom fit TP.

There`s a member on Castboolits that puts together a kit to do this with ,but I don`t know if it`s for the saeco set up yet ???

 

[rcmodel]

It would appear from the Saeco bullet mold charts they only make one top punch for flat-point .30 cal bullets.

http://www.redding-reloading.com/online-catalog/88-bullet-moulds-charts

So that would have to be the #46411 punch.

If it doesn't exactly fit the Lyman bullet?
Send a couple of bullets and the top punch back to Redding and they will make it so it does.

rc

 

[blarby]

Looks like a plan, thanks RC.