Satern Powder Funnels

[Blackrock]

Cold and dry here in Arizona this winter and the static on my RCBS and Lee powder funnels was a problem. Clean em up and wipe em down with dryer sheets and within 10 to 15 minutes they were fuzzing up on me.

So I ordered two of those aluminum Satern caliber specific powder funnels in
.22 and 6mm. They sure do work nice and no more jiggling to get all the powder down. They are a little pricey but what the heck try em you'll like em.

 

[noylj]

I have applied a graphite spray to mine and never have a static problem again.

 

[kingmt]

I normally just lick my finger then wipe the plastic down & let dry. Seems to be the best & cheapest method I have found for static free.

 

[BADUNAME37]

I agree, I use the Saturn funnels. Notice how the bottom is weighted with surrounding brass so they won't tip over when placed on the cartridge case!

 

[BADUNAME37]

I normally just lick my finger then wipe the plastic down & let dry. Seems to be the best & cheapest method I have found for static free.

Does the powder taste good?
Less taste, MORE filling!

 

[Jim Watson]

I have a .30 Satern and will likely get a .22.
For the other stuff, I have one of the last of the old Pacific aluminum funnels.

Midway mold release spray stopped static cling on a plastic scale pan, I bet it would work on a plastic funnel.

 

[kingmt]

Does the powder taste good?
Less taste, MORE filling!

It's alright but it really gives you a blast of energy.

I'm sure I said lick my finger & not the pan. I rarely use a pan or funnel anymore but a little spit seems to work great & it's free.