Savage 10FCP-K accutrigger Question

[mrracer98]

I am looking at ordering one of these guns. My question is, what is the adjustable trigger pull weight for this model? I have seen that it adjustbale down to 1.5#, but I thought tactical accutriggers were only adjustable down to 3-3.5#?

Any one have info or website as to all differeny models with what weight of accutrigger that they have?

Also is it hard to change/modify the parts to decrease the accutrigger weight?

Thanks from a newbie!

 

[Big_E]

I thought all accutriggers were the same. Other members might know more than me though, but I will probably order one of these too.

 

[mrracer98]

I was under the impression they're 3 different "models" of the accutrigger

A "regular," "Tactical," and "Target"

I could be wrong too.. I dont know. hard to find definite info on it though, but I do know different models have different weights of pull adjustability. Mainly for liability reasons I am sure...

 

[jackdanson]

I think mrracer is right. There are a few different models... some of their target triggers are adjustable to well under 1#.

From Savage's police site.

All rifles in this series offer standard features like oversized bolt handles permitting rapid acquisition for follow-up shots. And, Savage's crisp, creep-free AccuTrigger allows you to easily adjust trigger pull weight from approximately 1 1/2 to 6 pounds. With stock choices like the well-known H-S Precision Tactical, the Choate or the McMillan, this series is a must for today's security forces.

So it looks like all the tacticals are adjustable to 1.5. Don't get the HS precision stock.. bad folks.

 

[R.W.Dale]

Also is it hard to change/modify the parts to decrease the accutrigger weight?

Remove the glock blade and dial the trigger down and you won't need to do anything else

Apparently there are 3 triggers because I know the target accutrigger as found on the LRPV can be adjusted down to a load only when ready to shoot few OZ

 

[JDGray]

My 10FP is set at 1.5, with no mods, my MKII is set at 1.5 with a coil cut off the spring. I followed Krochus's advice, and removed the blade on my MKII, much nicer

 

[R.W.Dale]

My 10FP is set at 1.5, with no mods, my MKII is set at 1.5 with a coil cut off the spring. I followed Krochus's advice, and removed the blade on my MKII, much nicer

I used to be really down on what I used to call the accu/glock trigger till I learned the guys over on Savage Shooters were simply removing the Glock part and discarding it with no ill effects.

Now I appreciate them more sans blade of course