moooose102
Member
ok. i am not really certain where to post this. but, for anyone who has the unfortunate misery of owning a sheridan air gun with a b-square scope mount. you know this combination will not hold a zero worth a dam^. well, after messing around with several different ideas, and trying them out for a while now, his is the best i have come up with. and it WORKS. it isnt reall eye pleasing, but it isnt terrible, and could be helped along dramaticly with some black screws. i did what i did with what i had around. one of these days, i will change out the screws for black ones. anyway, what i did was drill and tap the mount to accept 4mm bolts, and reinstalled the mount as usual. then, with a level, got the barrel level, and then leveled the scope mount with the 2 bolts. once i had every thing where it belonged, i gave both bolts an additional 1/6th turn to make sure the mount was "stressed" so it would not move again. i let the locktite dry, and went out and shot 1/2" groups @ 30 feet. before, i was lucky to keep 5 shots on the same target!
[/IMG]
[/IMG]