sig p229

Status
Not open for further replies.
The 229 is a good gun, as are most of the SIG "P" series. Id suggest finding a dealer that has most of them, and get a feel on them all and see what you like best. They are all pretty similar size wise, but all have a definitely different "feel" in your hand.

I personally found the P226 had a more comfortable grip, and carried just as easily as the P229.
 
The non-E2 grips fit me very well but the E2 grips and I did not get along so watch for that. Fortunately there is a solid aftermarket so you'll find something that works well for you. The p229 chassis is simple elegance and solid. I recommend a .40 to start w/ so its easier to switch between barrels later on if that is important to you.
 
Its a good pistol, though not necessarily a "size efficient" one, with an approximate lifespan of between 15K and 35K depending on the chambering, ammunition used, and maintenance.
 
Its a good pistol, though not necessarily a "size efficient" one, with an approximate lifespan of between 15K and 35K depending on the chambering, ammunition used, and maintenance.

15K is definitely on the short side of lifespan expectations. From what I have read, Sigs may develop cracks in the alloy frame rails at around 25-30K rounds, but that (at least in the past) Sig would willingly replace them. I don't know if the new Sig leadership is as friendly about it these days.
 
approximate lifespan of between 15K and 35K depending on the chambering, ammunition used, and maintenance.

Seems like a pretty short life for an $800 dollar handgun.
 
Excellent weapon, but a bit on the heavy side for CCW. I love my 229 Elite, but can't carry it all day.:cool:
 
Sig P229 (a short P226) -- great trigger, love the DA/SA for quick follow-up shots and no safety to mess with or the scary (for me, anyway) "cocked and locked" configuration of SAs. The relatively short barrel (compared with a 226 or full sized 9mm) requires some practice for proficiency, but it is an accurate pistol out of the box. The 229 (double stack magazine) fit my hand better than the 239 (single stack magazine). Fun to shoot as the felt recoil (9mm) is minor.

I've fired several thousand rounds through mine with minimal maintenance (clean it every third time to the range and grease the metal-to-metal parts). No failures even when using seriously old ammo, all manner of hollowpoints, reloads of questionable quality.

It's made of metal, not plastic, which may give you more confidence in the durability of the weapon.

It's the weapon of choice for loads of giverment (that's not a typo) agencies and has gone through lots of official endurance testing. See the listing on the "official" source of all information on the internet ... Wikipedia

http://en.wikipedia.org/wiki/SIG_Sauer_P226#Users

Concealablity is always a trade off size, firepower and comfort. There are lots of inexpensive, concealable "belly guns" on the market that fit in a pocket, but, in my experience, they hurt to shoot (especially the 380s) and, if they hurt to shoot, you won't practice with them or take them out for a fun day of plinking. If you are considering a 229 for everyday carry, I'd suggest that you also look at the 239.

You get what you pay for in this world. If you're buying a pistol for self-defense, shopping for a bargain to save a few bucks is probably a bad idea.
 
Pilgram said:
You get what you pay for in this world. If you're buying a pistol for self-defense, shopping for a bargain to save a few bucks is probably a bad idea.

In general this is good advice, but there is an exception with Sigs. They are a very good bargain if you can find a Certified Pre-Owned (CPO) pistol--used guns (usually LEO trade-ins) which have been checked by the armorers at Sig before being resold.

You can pick up a CPO P229 for about $300 less than it would cost new--usually under $600.
 
Check out Summitgunbroker.com
They have awesome deals and the owner is very helpful.

I was going to get a 229 but needed a glock 19 first for ccw. Next will be the 229.
 
5 so far..

...

All DA/SA:

Have to agree with the others, that's why I own 5 of them, in the P229n/r, two 40's and P229R CT 9mm

In the same family (shape/size) P228n/r 9mm, and coming soon, a NIB P225n/r 9mm

As mentioned, all metal, great DA/SA triggers that have lots of after market support - one being Wolff Springs. They're just reliable, accurate, and are one of the easiest, if not the_easiest, guns to disassemble, inspect, clean, and reassemble, out there, bar none..

They are a mid-size gun that, for most, are ccw friendly and are great point and shoot guns because of their balance (and that effect) when it comes to softer/felt recoil and getting back on target quickly..

They offer any owner/shooter a full choice of ammo weights/velocity's to choose from for best feel/accuracy/punch.

New or used or CPO's, if it's on your list, there is a way to put one, or more, into your herd..

Last, Sigs's CS (service) and customer support, parts, etc., are first class to deal with, in all of my contacts/needs, thus far over the last 5yrs..

Luck,


Ls
 
I think the P229 is one of the best shooting guns for .40 S&W (after all it was designed for this cartridge) and .357 Sig available. In 9mm I prefer the balance of the old P228.
 
I have a P229 in .40 and .357sig. I upgraded the sights to a ghost ring with Tritium inserts and Hogue Grips. The grips allow me to achieve a proper grip more instinctively.

I have no complaints about fit nor function. Very reliable and I'm able to carry it in an inside the waist holster all day with no discomfort.

Highly recommended.
 
Status
Not open for further replies.
Back
Top