PhoenixRookie
Member
- Joined
- Mar 4, 2008
- Messages
- 54
I love my SR9 and have never had an issue whatsoever regardless of the ammo used. But then I screwed up. Rather than use the slide release button, I mistakenly pulled back on the slide to release it. It released only about a half inch where it normally would when using the button. Now it will only go back into place with a gentle tap. It fires a round and then sticks open.
I took it home, tore it apart and cleaned it from top to bottom and ensured to grease the rails. But the results are the same. And it doesn't matter if it has a magazine in it or not. The slide just won't go back into place without nudging it making it a one shot gun now.
Any ideas on what the heck I did to it? Or should I just go back to Ruger?
Thanks gang
I took it home, tore it apart and cleaned it from top to bottom and ensured to grease the rails. But the results are the same. And it doesn't matter if it has a magazine in it or not. The slide just won't go back into place without nudging it making it a one shot gun now.
Any ideas on what the heck I did to it? Or should I just go back to Ruger?
Thanks gang