Somee hammers I made for my gun tinkering

[doubleh]

The mini jeweler's hammer and the little crosspeen are made from old, used up, cold chisels that I annealed and then rehardened. The handles are made from the smallest machinest's hammer handles I could find. I made these back in the '70's. The jeweler's hammer isn't used much but the crosspeen has a lot of use on it.

The non marring one is made from a 1" piece of left over delrin, a broken 3/8" electricians drill bit, and a piece of oak dowel. The drill rod is epoxied into the delrin head for a solid fit and pinned to reinforce it. I made this early this year and now it is my go-to non marring hammer. It has a quite a bit of use and is standing up to it.

 

[NIGHTLORD40K]

Love 'em, especially the Delrin-headed one!

 

[unclenunzie]

Funny how the mind works. I thought the title would refer to gun hammers as in DA/SA, etc. Must be the years I was looking for a suitable spare Ruger hammer for my SP101 so I could make it DAO. Those are really nice examples of tool-type Hammers