Source for Crosman Mark II Co2 oring seal
- Thread starter Falco348
- Start date
- Status
There are several types of o-ring kits available online. Not speciffically for your aplication, I mean as a universal kit containing several sizes and diameters. most are "china" made, but a few are are good quality such as "viton".
I would research the speciffic o-ring your refer to on the size of it, then fine a small or large kit to get it out of.
Is it just missing , or do you have it to be able to measure it?
I would research the speciffic o-ring your refer to on the size of it, then fine a small or large kit to get it out of.
Is it just missing , or do you have it to be able to measure it?
Septicdeath
Member
- Joined
- Jan 12, 2020
- Messages
- 566
22250Rem
Member
If Jg airguns doesn't have it, have you tried Baker Airguns? They list a lot of seal kits for Crosman products. www.bakerairguns.com
OP
OP
Falco348
Member
- Joined
- Feb 21, 2021
- Messages
- 10
Thanks!
Septicdeath
Member
- Joined
- Jan 12, 2020
- Messages
- 566
You should just buy the kit. You will probably need it
https://www.jgairguns.biz/mk1-mk2-c...hange-required-complete-seal-kit-p-15438.html
maxxhavoc
Member
Ok, if it is an O-ring (and not a quad seal, etc) then buy the Metric and SAE set from Harbor Freight. Both should be $15. Every O ring in pretty much every airgun will be in one of the two.
If you want to be sure what you get is correct, go to the Crosman parts catalog for your gun ( probably https://support.crosman.com/hc/en-us/articles/203544200-MARK-II-Owner-s-Manual-EVP-1966-1986- ) and call Crosman and see if they have the exact one you need. If Crosman sells it for $1, you can get it on eBay for $3 or an airgun vendor for $4.
Edit-just noticed the Entire gun parts list is not sold by Crosman any more for that model. Still, get the seal name, etc from the list for when you talk to vendors.
If you want to be sure what you get is correct, go to the Crosman parts catalog for your gun ( probably https://support.crosman.com/hc/en-us/articles/203544200-MARK-II-Owner-s-Manual-EVP-1966-1986- ) and call Crosman and see if they have the exact one you need. If Crosman sells it for $1, you can get it on eBay for $3 or an airgun vendor for $4.
Edit-just noticed the Entire gun parts list is not sold by Crosman any more for that model. Still, get the seal name, etc from the list for when you talk to vendors.
beag_nut
Member
I needed an o-ring for my Crosman 600 (very old semi) and got it on eBay. Search there.
OP
OP
Falco348
Member
- Joined
- Feb 21, 2021
- Messages
- 10
Thanks for the info!
I suggest www.mac1airgunshop.com. One of the best in the business and will provide seals and orings of the proper durometer [hardness].
Why not deal directly with Crossman? Google them (sorry I don't have their contact info at my fingertips). You can contact them there and they will email you a parts diagram. You have to order by phone but that's not a bad thing because the phone operator is knowledgeable about the parts. Shipping is a flat rate of $4.
I just ordered some parts for a Crossman air rifle and that's how it went down for me.
I just ordered some parts for a Crossman air rifle and that's how it went down for me.
- Status
