Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Springs for Llama

Discussion in 'Gunsmithing and Repairs' started by Sisco, Jul 12, 2003.

Thread Status:
Not open for further replies.
  1. Sisco

    Sisco Member

    Joined:
    Dec 24, 2002
    Messages:
    2,775
    Location:
    KS
    I've got an old model Llama in 9mm Largo with a weak recoil spring.
    Neither Wolff or Numrich has replacement springs for my model, do you think a 38 super spring would work?
     
  2. Jim K

    Jim K Member

    Joined:
    Dec 31, 2002
    Messages:
    17,566
    I think it will, but I am not positive. You might try a .45 spring (a lot cheaper) for fit; if it works, you have a large range of weights to play with.

    Jim
     
  3. Sisco

    Sisco Member

    Joined:
    Dec 24, 2002
    Messages:
    2,775
    Location:
    KS
    Assume I should start with the lightest?
     
  4. Sunray

    Sunray Member

    Joined:
    May 17, 2003
    Messages:
    10,475
    Location:
    London, Ont.
    You'll have to try eery one you can get an see. 9mm Largo isn't a common round. Try a net search. Yahoo etc.
     
  5. Sisco

    Sisco Member

    Joined:
    Dec 24, 2002
    Messages:
    2,775
    Location:
    KS
    Ran into a fellow this morning that has a Largo spring he'll let me have. He also has a slide stop that will fit. Didn't think I needed a new stop until I was at the range this morning and the entire slide assy. fell off the gun into the dirt. :what:
     
Thread Status:
Not open for further replies.

Share This Page