suppressing a GSR

[mainecoon]

Any recommendation for suppressing the Ruger Gunsite Scout? Would want a can that does not mess up the balance of the rifle.

 

[Sam1911]

You could talk to our very own Zak Smith about that. https://thunderbeastarms.com/

Send him a PM.

 

[MrM4]

My friend has been running a Lane LLC .30 King can on his and a SRT Shadow TI. Both sound good

 

[ATCDoktor]

I have been running an AAC 762 on mine for the last 2 years and it suppresses well.









The one concern with suppressing the Ruger GSR is that your suppressor (or mount if your suppressor uses one) is not indexing on the barrel shoulder, it indexes on the front sight (which is pressed and pinned on the barrel behind the threads).

The concern is that the front sight base may not be square thus causing the can to pull to one side or the other when tightened and increasing the chances of a baffle/endcap strike.

Check with the manufacturer of the suppressor you intend to use and see if they have any guidance with respect to using their can on the GSR.