Min
Member
The specs on the Olight M20 Warrior LED is pretty impressive.
Output
* 7 lumens, 150 hours
* 90 lumens, 12 hours
* 250 lumens, 4 hours
* Strobe
Batteries: 2xCR123A, 2xRCR123A, 2x16340, 1x18650, or 1x17670
Dimensions: Length - 140mm/5.5", Bezel diameter - 33.5mm/1.3", Body diameter - 24.80mm/0.98"
Weight: 120.50g (without batteries)
Accessories: Holster, lanyard, two spare o-rings, spare fluorescent rubber boot, battery magazine
* World-class super bright Cree XR-E R2 (Premium)
* Throws 250 meters
* Tactical momentary-on forward switch
* Three digitally controlled constant brightness levels and strobe
* Auto memorization of specific function for instant access
* Linear functional adjustment for easy change of functions
* Front removable stainless steel striking bezel and rear striking bezel, removable for daily use, installable for close quarter combat
* Superior heat sink that disperses heat to protect LED and electrical components
* Ergonomic design with solid structure for easy operation
* Full orange peel reflector and perfectly centered light source for flawless beam with the longest shot
* Rugged indestructible aluminum body with anti-scratching type III Hard Anodization
* Advanced low battery indication, blink three times every 20 seconds when battery power is low
* Cutting-edge reverse polarity protection, with the right batteries, you can leave them in long direction for extended period, it will not burn the circuit
* Strong lanyard with quick release for easy access
* Mil-spec: MIL-STD-810F
* Water proof
* Anti-shatter, anti-scratch, anti-slip ultra clear lens
* Lock-out function to prevent accidental activation
* Metal ‘cigar hold’ ring optimally positioned to offer additional anti-roll properties and is pre-installed but removable for smoother body hold
* Engineered anti-slip body texture to give you a firm, tight grip
* Built-in steel pocket clip
* Advanced digital power management system for constant, even brightness through entire battery life
* Battery magazine to prevent 2xCR123A batteries from rattling in the battery tube
Cost is around $100.
Output
* 7 lumens, 150 hours
* 90 lumens, 12 hours
* 250 lumens, 4 hours
* Strobe
Batteries: 2xCR123A, 2xRCR123A, 2x16340, 1x18650, or 1x17670
Dimensions: Length - 140mm/5.5", Bezel diameter - 33.5mm/1.3", Body diameter - 24.80mm/0.98"
Weight: 120.50g (without batteries)
Accessories: Holster, lanyard, two spare o-rings, spare fluorescent rubber boot, battery magazine
* World-class super bright Cree XR-E R2 (Premium)
* Throws 250 meters
* Tactical momentary-on forward switch
* Three digitally controlled constant brightness levels and strobe
* Auto memorization of specific function for instant access
* Linear functional adjustment for easy change of functions
* Front removable stainless steel striking bezel and rear striking bezel, removable for daily use, installable for close quarter combat
* Superior heat sink that disperses heat to protect LED and electrical components
* Ergonomic design with solid structure for easy operation
* Full orange peel reflector and perfectly centered light source for flawless beam with the longest shot
* Rugged indestructible aluminum body with anti-scratching type III Hard Anodization
* Advanced low battery indication, blink three times every 20 seconds when battery power is low
* Cutting-edge reverse polarity protection, with the right batteries, you can leave them in long direction for extended period, it will not burn the circuit
* Strong lanyard with quick release for easy access
* Mil-spec: MIL-STD-810F
* Water proof
* Anti-shatter, anti-scratch, anti-slip ultra clear lens
* Lock-out function to prevent accidental activation
* Metal ‘cigar hold’ ring optimally positioned to offer additional anti-roll properties and is pre-installed but removable for smoother body hold
* Engineered anti-slip body texture to give you a firm, tight grip
* Built-in steel pocket clip
* Advanced digital power management system for constant, even brightness through entire battery life
* Battery magazine to prevent 2xCR123A batteries from rattling in the battery tube
Cost is around $100.