That Darn Sticker

Terry G

Member
Joined
Mar 7, 2007
Messages
1,229
Location
Northwoods
I recently bought a Winchester Wildcat mainly because it's already threaded for a suppressor. It had one of those white and red "Winchester" stickers on the barrel and I can't get the thing off. I can't scraper it off without damaging the blueing which is not great to begin with, (A Winchester made in Turkey? Oliver is probably spinning in his grave!) Any suggestions? Thanks.
 
I'd shoot it until the barrel gets hot, maybe it'll come right off.

Winchester needs to bring their production back here, Oliver is beyond spinning in his grave- he's probably planning to return and haunt the folks responsible for running his name into the dirt.
 
Simple Green works well, need to let it soak for 15 minutes (wet a paper towel wrapped about the barrel), using a plastic razor blade
is also a handy. I keep a stash on the gun bench for all sorts of tasks. Screen Shot 2022-02-23 at 4.58.36 PM.png
 
Whatever wonder liquid you try, wrap the barrel with paper towel over the sticker 1st.
Then wet the paper towel with your wonder liquid of choice. That paper towels hold the liquid on the label allowing it to soak for an extended amount of time, overnight, etc.
My go to wonder liquid is WD40 or Goo Gone.
Use a plastic scraper or dental floss to help coax the sticker off.
jmo,
De-badging a motorcycle:
the WD40 soak:
WD40Soak.JPG
Floss under the sticker:
TankD.JPG
:)
.
.
 
Last edited:
My NAPA auto parts store has a product in a spray can called (I think) spray adhesive remover. It worked on every kind of adhesive I have tried it on. Spray on, leave sit a bit, wipe off. Takes all traces of adhesive away with a cloth.
 
I Have Had Excellent results with odorless mineral spirits. Sometimes I get knives with stickers and it is a pain to get them off without messing things up. Just take your time and soak and rub with a cloth.
 
I'd shoot it until the barrel gets hot, maybe it'll come right off.

Winchester needs to bring their production back here, Oliver is beyond spinning in his grave- he's probably planning to return and haunt the folks responsible for running his name into the dirt.

But Winchester is just a brand that FN puts on guns they export to the US...


To the OP, Goo Gone is the product you seek, won't hurt your finish and makes short work of most sticky problems like stickers.
 
To parrot the other ones so far. I take off the majority of adhesive on guns with a heat gun. Then Goo-gone the rest. Plenty of places carry Goo-gone. I found my latest bottle at Target of all places if you can't find what your wife has stashed away.
 
When acetone (alcohol) doesn’t work, I use MEK.
It is great to remove permanent marker stains on plastic Folgers coffee containers i use to store reloading components.
I guess it’s a different base from acetone, but I’m no chemist?
 
Back
Top