trouble with LNL

[tony433]

when mine started to do the same thing I just cut a small piece of cadrboard from an old ammo box and put a piece on each side and snugged it down with a wrench holds nice and tight just my .02

 

[ole farmerbuck]

I did that too but trust me, they wont be loose with the free shims.

 

[ole farmerbuck]

Here's how i did the rubber band before the shims. (also a pic of the $1.47 light to see in the cases better)

 

[Walkalong]

Love the rubber band. Simple and affective. Good old American ingenuity.

Sounds like the shims work great.

 

[ole farmerbuck]

Yea, i should have taken a pic of one. They are split and over lap some to get them on the bushings.

 

[floydster]

ofb,
I am going to call Hornady and get the shims, thanks for the tip.
Floyd

 

[ole farmerbuck]

No problem. I cant turn my bushings all the way, they're too tight but i'm sure they will loosen in time.

 

[ole farmerbuck]

I looked at one and they DONT overlap like i said but they are split.

 

[Seedtick]

... i used a rubber band.

I use to run some quarter million dollar machines, a couple were brand spanking new, that wouldn't run without a couple of rubber bands.

But our shop towels came bundled with some heavy duty rubber bands that worked great so the supply was endless.

ST

 

[ole farmerbuck]

I use to run some quarter million dollar machines, a couple were brand spanking new, that wouldn't run without a couple of rubber bands.

But our shop towels came bundled with some heavy duty rubber bands that worked great so the supply was endless.

ST

As of lastnight, rubber bands are now helping my RCBS power trimmer. Sure saves time.