sleepysquirrel2
Member
- Joined
- Dec 17, 2020
- Messages
- 42
Does anyone have good load data for 32 S&W Long with Unique?
The lee manual says that for a 98 gr lead bullet, to start at 2.7 grains and never exceed 2.7 grains, which gives 9700 CUP.
The Lyman manual says for a 100gr jacketed bullet, to go between 2.5 gr and 2.8 gr (with no pressure data)/
Yet when I run these in quickload, it's telling me for a 98 gr bullet, 2.7gr unique gives 9000 psi, but plenty of run to push higher (the PMAP is 14500 psi, so it says stuffing 3 gr of unique is safe).
Does anyone have any personal recipes for 32's with Unique?
The lee manual says that for a 98 gr lead bullet, to start at 2.7 grains and never exceed 2.7 grains, which gives 9700 CUP.
The Lyman manual says for a 100gr jacketed bullet, to go between 2.5 gr and 2.8 gr (with no pressure data)/
Yet when I run these in quickload, it's telling me for a 98 gr bullet, 2.7gr unique gives 9000 psi, but plenty of run to push higher (the PMAP is 14500 psi, so it says stuffing 3 gr of unique is safe).
Does anyone have any personal recipes for 32's with Unique?
