Cannibul
Member
I picked up a few lbs of this powder to try out. In my .45 ACP and 10MM I've had really good luck with it.
Yesterday I decided to load some 9mm on my Hornady LnL AP. In 200 rounds I had 34 short drops. Today I did 200 rounds of .38 SPL on the Hornady and had 37 short drops.
The powder works fine in my Dillon powder measure. However through two different Hornady powder measures it was bridging in the base of the measure. I never had a long drop. In fact it would sometimes drop 2-3 shorts in a row.
If you're going to load this powder make sure to have some sort of positive powder check on your press. I was loading 3.5 grs on the .38 SPL and the short drops were anywhere from 1.1 grs to 2.3 grs. I know my eyes would have a hard time catching that 2.3 gr drop in a .38 SPL case.
Again, Dillon powder measure is no problem. Two different Hornady powder measures had the same problem. I also ran some Titegroup and Unique through the Hornady measures with no problem.
Semper Fi!
Yesterday I decided to load some 9mm on my Hornady LnL AP. In 200 rounds I had 34 short drops. Today I did 200 rounds of .38 SPL on the Hornady and had 37 short drops.
The powder works fine in my Dillon powder measure. However through two different Hornady powder measures it was bridging in the base of the measure. I never had a long drop. In fact it would sometimes drop 2-3 shorts in a row.
If you're going to load this powder make sure to have some sort of positive powder check on your press. I was loading 3.5 grs on the .38 SPL and the short drops were anywhere from 1.1 grs to 2.3 grs. I know my eyes would have a hard time catching that 2.3 gr drop in a .38 SPL case.
Again, Dillon powder measure is no problem. Two different Hornady powder measures had the same problem. I also ran some Titegroup and Unique through the Hornady measures with no problem.
Semper Fi!