orionengnr
Member
- Joined
- Jan 3, 2005
- Messages
- 5,709
my routine
--Disassemble (field strip).
--Blast slide, outside of barrel, recoil spring assy with Eezox.
--Clean inside of barrel with Hoppe's, brush (if necessary), patch
--Blast inside of barrel with Eezox
--Clean patch down the barrel
--Using a clean rag, wipe off excess Eezox
--Use that Eezox-damp rag to wipe down the frame externals and internals.
--If it is a polymer frame, a drop of FP-10 on each frame rail.
--Reassemble and cycle by hand 10-15 times.
Done.
Revolvers--similar, but less time on dis-and re-assembly, more time brushing cylinder.
Eezox rules!
--Disassemble (field strip).
--Blast slide, outside of barrel, recoil spring assy with Eezox.
--Clean inside of barrel with Hoppe's, brush (if necessary), patch
--Blast inside of barrel with Eezox
--Clean patch down the barrel
--Using a clean rag, wipe off excess Eezox
--Use that Eezox-damp rag to wipe down the frame externals and internals.
--If it is a polymer frame, a drop of FP-10 on each frame rail.
--Reassemble and cycle by hand 10-15 times.
Done.
Revolvers--similar, but less time on dis-and re-assembly, more time brushing cylinder.
Eezox rules!