what to do?

[mnhntr]

I loaded 100rds of 260 for my LRP that were great in that rifle. I only neck sized them and now I have got a new to me Remington 700 in 260 and sold the LRP. The loads will not chamber in the 700, they start to bind up about 3/8 of and inch from the rim. Can I pull the bullets and powder and resize in my FL die without depriming then reload for the new rifle or do I have to waste 100 primers?

 

[NeuseRvrRat]

Can I pull the bullets and powder and resize in my FL die without depriming then reload for the new rifle

yes, as long as your decapping pin is removable

if not, then you can carefully decap the live primers and reuse them.

 

[mnhntr]

Thanks

 

[918v]

Or you can just buy a Redding body die and resize the loaded round.

 

[kingmt]

If you don't use the expander then the neck will be undersized & probably shave the bullets.

Just resize easy & catch the primers to ruse.

 

[NeuseRvrRat]

If you don't use the expander then the neck will be undersized & probably shave the bullets.

on some dies you can remove the decapping pin while still leaving the expander ball in the die.