Where are reloading components available (Not a Discussion Thread)

Status
Not open for further replies.
Thanks for the insight.....good stuff I'm inclined to go with the Berry's 125 Gr HP. Pretty reasonable for 1000. Good info on the 158 gr, but in my "new to the fold ignorance", I can't find powder & load info in any of the threads for the Berry 125 Gr.

As soon as I can see some way of marrying up a bullet and power, I'll get some on order so I can load some thing in the next week or so.
 
Jframenewbee said:
I can't find powder & load info in any of the threads for the Berry 125 Gr.

http://www.thehighroad.org/showthread.php?t=711080


Berry's MFG recommends we use low-to-mid range jacketed load data with max velocity of 1250 fps for their regular plated bullets and 1450 fps for their thicker plated (TP) bullets - (I have used lead load data with regular Berry's plated bullets with good results also) - http://www.berrysmfg.com/faq-q9-c1-How_do_I_load_Berrys_Preferred_Plated_Bullets.aspx


Current Alliant load data for .38Spl 125 gr bullet (barrel length 6") - http://www.alliantpowder.com/reloaders/recipedetail.aspx?gtypeid=1&weight=125&shellid=26&bulletid=28
125 gr GDHP Bullseye OAL 1.44" Max 4.5 gr (914 fps)

125 gr GDHP American Select OAL 1.44" Max 4.1 gr (839 fps)

125 gr GDHP Unique OAL 1.44" Max 5.7 gr (980 fps)

125 gr GDHP Power Pistol OAL 1.44" Max 6.1 gr (986 fps)

Current Hodgdon load data for .38Spl 125 gr cast RNFP and Hornady XTP bullets (barrel length 7.7"):
125 gr cast LRNFP IMR SR 4756 .358" OAL 1.445" Start 5.4 gr (974 fps) 13,300 PSI - Max 6.0 gr (1091 fps) 16,100 PSI

125 gr cast LRNFP AutoComp .358" OAL 1.455" Start 5.7 gr (1048 fps) 7,300 PSI - Max 6.2 gr (1139 fps) 10,800 PSI

125 gr cast LRNFP Hodgdon Universal .358" OAL 1.445" Start 4.3 gr (872 fps) 8,700 CUP - Max 4.7 gr (1036 fps) 16,800 CUP

125 gr cast LRNFP W231/HP-38 .358" OAL 1.445" Start 3.8 gr (876 fps) 10,300 CUP - Max 4.8 gr (1071 fps) 16,900 CUP

125 gr cast LRNFP IMR SR 7625 .358" OAL 1.445" Start 4.6 gr (966 fps) 13,700 PSI - Max 5.2 gr (1075 fps) 16,700 PSI

125 gr cast LRNFP IMR PB .358" OAL 1.445" Start 4.0 gr (959 fps) 13,400 PSI - Max 4.5 gr (1060 fps) 16,500 PSI

125 gr cast LRNFP IMR Trail Boss .358" OAL 1.445" Start 3.0 gr (753 fps) 11,600 PSI - Max 5.3 gr (952 fps) 13,400 PSI

125 gr cast LRNFP Hodgdon Titegroup .358" OAL 1.445" Start 3.2 gr (856 fps) 8,400 CUP - Max 3.8 gr (985 fps) 12,000 CUP

125 gr cast LRNFP IMR 700-X .358" OAL 1.445" Start 3.7 gr (982 fps) 14,500 PSI - Max 4.2 gr (1076 fps) 16,200 PSI

125 gr cast LRNFP Hodgdon Clays .358" OAL 1.445" Start 2.5 gr (810 fps) 8,400 CUP - Max 3.5 gr (978 fps) 16,900 CUP


125 gr Hornady XTP IMR SR 4756 .357" OAL 1.455" Start 5.3 gr (939 fps) 14,700 PSI - Max 6.0 gr (1046 fps) 16,400 PSI

125 gr Hornady XTP Hodgdon HS-6 .357" OAL 1.455" Start 6.5 gr (931 fps) 13,100 CUP - Max 7.2 gr (1048 fps) 16,600 CUP

125 gr Hornady XTP AutoComp .357" OAL 1.455" Start 5.7 gr (985 fps) 13,600 PSI - Max 6.2 gr (1068 fps) 16,500 PSI

125 gr Hornady XTP Hodgdon Universal .357" OAL 1.455" Start 4.7 gr (918 fps) 12,600 CUP - Max 5.2 gr (1019 fps) 17,000 CUP

125 gr Hornady XTP W231/HP-38 .357" OAL 1.455" Start 4.3 gr (826 fps) 13,300 CUP - Max 4.9 gr (934 fps) 16,300 CUP

125 gr Hornady XTP IMR SR 7625 .357" OAL 1.455" Start 4.5 gr (875 fps) 13,800 PSI - Max 5.1 gr (999 fps) 16,300 PSI

125 gr Hornady XTP IMR PB
.357" OAL 1.455" Start 3.6 gr (810 fps) 13,000 PSI - Max 4.1 gr (926 fps) 15,700 PSI

125 gr Hornady XTP Hodgdon Titegroup .357" OAL 1.455" Start 4.3 gr (953 fps) 12,800 CUP - Max 4.6 gr (1010 fps) 15,600 CUP

125 gr Hornady XTP IMR 700-X .357" OAL 1.455" Start 3.6 gr (863 fps) 14,300 PSI - Max 4.2 gr (969 fps) 17,000 PSI

125 gr Hornady XTP Hodgdon Clays .357" OAL 1.455" Start 3.5 gr (843 fps) 12,400 CUP - Max 3.9 gr (937 fps) 16,100 CUP
 
Last edited:
.38 Spl Bullets / powder

Finally got it sorted out. Thanks for the help bd!

First time in a long time sifting throught all these powders for the type of bullet kinda made me cross eyed. You can tell its been a long time I did any loading, 'cause I was used to going to the corner gun store, buying the bullets in one of my reloading manuals and getting the powder called out for that particular bullet and walking out with the stuff.

Hope it gets back to that someday!

I'll be lurking about...lots of good stuff on here.

Jframe :D
 
PowerBond Plated Bullets (Shipping is $3.00 per each box of 500 bullets):

NOTE: To order, click on "Confirm" box, click on "Order These Bullets", click on "CHECK BASKET CONTENTS" at the top then "CHECK OUT"

38 HP 125 gr $54 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=38HP125&Category_Code=

40 HP 180 gr $68 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=40HP180&Category_Code=

44 FP 240 gr $71 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=44FP240&Category_Code=

45 FP 230 gr $69 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=45FP230&Category_Code=


3rd Generation Shooting Supplies:

Alliant Promo ($96 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3624.html

Alliant Green Dot ($17 / 1 lb, $114 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3621.html

Alliant American Select ($63 / 4 lbs, $114 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3616.html

Alliant Herco ($63 / 4 lbs, $114 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3622.html

Alliant Unique ($17 / 1 lb) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3633.html

Alliant Blue Dot ($73 / 5 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3617.html

Alliant Reloder 15 ($21 / 1 lb) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3627.html


Hodgdon Longshot ($19 / 1 lb, $72 / 4 lbs, $139 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3657.html

Hodgdon Superformance ($144 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,5895.html]


IMR 7625 ($23 / 1 lb, $169 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3681.html

IMR PB ($166 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3678.html


Winchester WST ($129 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3691.html

Winchester 760 ($21 / 1 lb, $147 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3687.html

Winchester 780 ($146 / 8 lbs) - http://store.thirdgenerationshootingsupply.com/browse.cfm/2,4486.html


Bruno's Shooters Supply:

Winchester 231 ($35 / 1 lb - in stock as of 4/18/13) - http://www.brunoshooters.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=BSS&Product_Code=2311


CCI SP #500 ($60/1000 - in stock as of 4/20/13) - http://www.brunoshooters.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=BSS&Product_Code=CCI500

Various Federal primers ($60/1000 - in stock as of 4/1/13) - http://www.brunoshooters.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=BSS&Category_Code=29F

Winchester SPM, LP, LRM ($60/1000 - in stock as of 4/1/13) - http://www.brunoshooters.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=BSS&Category_Code=29WI

Wolf SRM ($45/1000) and SR .223 ($50/1000 - in stock as of 4/12/13) - http://www.brunoshooters.com/Mercha...n=CTGY&Store_Code=BSS&Category_Code=WOLFSMMAG
 
Last edited:
Last edited:
Reloading components & current supplier inventory

I'm again impressed by the detailed availability reports on component supplies.

bds.....I don't know what you do for a living, or how you make time to stay on top of all this availability data, but it's very much appreciated.

It'll take me a while to get in front of the learning curve since I'm not current on pistol loads. The main frustration I was dealing with are the variables of what powder to buy when bullet availability is also a moving target. Both of which required surfing a dozen or more supplier sites since I don't have a feel for the "better" ones.

Now that I got the stuff on order I'll focus on a set up for .38 spl, and the fun starts.

I can see where this end up getting me back into shooting my rifles again. I've got a .243 on a Model 70 action that I built up with a douglas stainless bbl for varmints 30yrs ago, and a .244 on a 722 Remington that my grandfather bought in the late 40's or early 50's. I souped up the .244 for varmint (groundhogs) and deer. I accurized and checkered / stippled the .244 and wouldn't part with them for anything. I'd still like to bench shoot them just for fun.

Thanks again for all the help......
 
Jframenewbee, LOL :D - You are very welcome.

Let's just say I work for the government and analyze a lot of data / facility practices - my primary job is detecting deviations onsite that led/may lead to negative outcomes.

Actually it's not that hard to do. I have various vendors' links bookmarked and search parameters set to "in-stock items only" and quickly scan the links to identify popular items in stock which I post here. Compared to my job that often gets intense, posting for this thread is a pleasant "break" for my brain that warms my heart knowing I am "paying it forward" for many who have mentored and helped me in past years.

I have many family/relatives/friends/neighbors/coworkers who use this thread and I am happy to do updates for THR members/guests when I get a chance before work/after work/during travel for work as I have benefitted from lurking THR for years before I joined and started posting.
 
bds said:
Let's just say I work for the government and analyze a lot of data / facility practices - my primary job is detecting deviations onsite that led/may lead to negative outcomes.

It's good to see that our tax dollars are being used for such a worthwhile effort! :D:neener::D

Thanks to bds and all contributors to this thread. :cool:
 
Thanks to THR and this thread I have been able to go from never reloaded to loading 9mm and 45ACP in a couple months. I think that is amazing considering how crazy it has been.

Thank you.
 
If you are looking for jacketed 9mm bullets, hurry!

Montana Gold Bullets (prices include free shipping) - http://montanagoldbullet.com/index....dex/?dir=asc&limit=all&order=caliber&q=bullet

9mm 115gr FMJ - 1,000 / $140 - http://montanagoldbullet.com/index.php/380-auto-355-fmj-95gr-79.html

9mm 115gr FMJ - 4,000 / $368 - http://montanagoldbullet.com/index.php/380-auto-355-fmj-95gr-83.html

9mm/115gr JHP - 1,000 / $148 - http://montanagoldbullet.com/index.php/9mm-115gr-jhp.html

9mm 115gr JHP - 4,000 / $380 - http://montanagoldbullet.com/index.php/9mm-115gr-jhp-79.html

9mm/124gr FMJ - 1,000 / $146 - http://montanagoldbullet.com/index.php/9mm-124gr-fmj.html

9mm/124gr JHP - 1,000 / $154 - http://montanagoldbullet.com/index.php/9mm-124gr-jhp-83.html

9mm/124gr CMJ -1,000 / $150 - http://montanagoldbullet.com/index.php/9mm-124gr-cmj.html

357SIG/125gr FMJ - 1,000 / $154 - http://montanagoldbullet.com/index.php/357sig-125gr-fmj.html

357SIG/125gr JHP - 1,000 / $163 - http://montanagoldbullet.com/index.php/357sig-125gr-jhp-86.html

357SIG/125gr JHP - 3,750 / $369 - http://montanagoldbullet.com/index.php/357sig-125gr-jhp-87.html

.38/125gr JHP - 1,000 / $160 - http://montanagoldbullet.com/index.php/38-125gr-jhp.html

.38/125gr JHP - 3,750 / $370 - http://montanagoldbullet.com/index.php/38-125gr-jhp-88.html

.38/158gr JHP - 1,000 / $175 - http://montanagoldbullet.com/index.php/38-158gr-jhp.html

.38/158gr JHP - 2,950 / $370 - http://montanagoldbullet.com/index.php/38-158gr-jhp-90.html

10mm/.40 155gr FMJ - 3,000 / $365 - http://montanagoldbullet.com/index.php/40-155gr-fmj-91.html

10mm/.40 165gr JHP - 1,000 / $186 - http://montanagoldbullet.com/index.php/40-165gr-jhp.html

10mm/.40 180gr FMJ - 2,500 / $365 - http://montanagoldbullet.com/index.php/40-180gr-fmj-96.html

.44/240gr JSP - 1,950 / $370 - http://montanagoldbullet.com/index.php/44-240gr-jsp-105.html

45/230gr FMJ - 1,000 / $202 - http://montanagoldbullet.com/index.php/45-230gr-fmj.html

45/230gr FMJ - 2,000 / $375 - http://montanagoldbullet.com/index.php/45-230gr-fmj-102.html

45/230gr JHP - 1,900 / $380 - http://montanagoldbullet.com/index.php/45-230gr-jhp-104.html
 
Last edited:
Wow, some MG bullets were selling out as I was posting and had to delete them from the list! :eek:'

Just now, 9mm 115 gr FMJ 4000 cases sold out!
 
I am looking for .225 Lyman sizing die I have looked on ebay ( I am not paying more than new price for a used item) Midway, Natchez, Grafs, and midsouth. Does any one have any other ideas or places to look?

Thanks.

I have been pan lubing and sizing with a Lee die but I just ordered a Lyman press and would like to find the sizing die for it.
 
@grubbylabs: What I've been able to do to find such hard-to-find items is sign up for all email alerts from the companies that have that feature on their website. Keep your computer on at all times with the tabs open to the product pages at the sites where you've signed up for alerts.

Next, when you're walking around the house/work, if you have a smartphone, set it up to receive email that way it will beep and you'll know to go back to the computer to put it in your cart and check out right away. Using this method has helped me land some reloading parts, ammo and other goods that otherwise I keep missing out on. Hopefully this works for you!
 
I'm looking for .30 cal pistol bullets to load 30 Tokarev. Mainly for plinking but would like some JHPs like Gold Dots or XTPs. I'm not sure yet if I should be using .308, or .312 dia. bullets. It's for a M57 Yugo.
 
Status
Not open for further replies.
Back
Top