Where can I get a .380 barrell for a pa63?

[ca-c54]

I have read that I can convert my pa63 from 9x18 to .380 with a barrell change.I can't find any sources on the net can anyone point me in the right direction? Thanks

 

[DHH]

Numrich Gun Parts Corp. should have what you need.

http://www.e-gunparts.com/

DHH

 

[Ron James]

Numrich should have the barrels, actually they are marked for the Kassner MKP ( PMK or what ever). The change is simple, not quite a drop in. You have to be very careful of the frame. It is soft aluminium and will ding in a heartbeat.. A little heat on the frame where the barrel joins helps. Also, if your not already aware, be careful when you remove the grips, the sear pivot pins are not staked in and will fall out. If you loose one they are (once again) listed under Kassner at Numrich. It may be best to call Numrich on their toll free number. Other than the barrel you don't have to make any other changes. Is it cost effective? No, I did it just to be doing it and a better selection of ammo.

 

[ca-c54]

Thanks for the help guys I appreciate it.

 

[AZAndy]

By the way, when you go to search for your part, it's under "European American Armory" as the manufacturer.

Hmmm, only $78... might have to think about doing the conversion myself!

A.

 

[FieroCDSP]

That's interesting. I'll have to suggest this to a friend who laments the cost of Mak ammo.

 

[ca-c54]

86.00 bucks at numrich it's gonna be a lot cheaper to 380 than mak.I live in socal and I can't find it any cheaper than 22.00 a box of 50.

 

[M2 Carbine]

ca-c54 86.00 bucks at numrich it's gonna be a lot cheaper to 380 than mak.I live in socal and I can't find it any cheaper than 22.00 a box of 50.

AIM has 9x18 for $7.50 a box.
http://www.aimsurplus.com/acatalog/9X18_Makarov.html