Who is using H322 for .223 bolt?

[jhansman]

Just got back from an all-day session at the range where this powder out-performed H355 and 4198 by a fair margin in my Howa 1500. Using a 60 gr. SMK in Lapua brass with 22.7gr of the stuff, I was getting sub-MOA grouping consistently. I am most pleased Anyone else a fan of this powder?

 

[HOWARD J]

I was using it-worked great but at $26 per # --I gave it up...............

 

[ole farmerbuck]

i heard it isnt the same as the old 322 but is still good stuff. I have a few lbs and might have to give it a try. I think Walkalong uses and likes it. (must be good)

 

[Fatelvis]

I use it in my XP-100R pistol to shoot half-scale silhouettes. So far, it is the most accurate I've tried. I use a Sierra 52 BTHP match over 23.4 grns 322, with a Rem 7 1/2 primer in a Lapua case. I am presently trying IMR's 8208 XBR, and getting some pretty respectable groups. You might want to give it a try too. It is similar in size/shape of 322, and flows well through a measure, just like 322.

 

[dakotasin]

i like h-322 in 223's. i run it w/ 55 grain hornadys and do quite well.

 

[jhansman]

Hmmm, that XP-100 is an interesting looking weapon. And, yes, H322 does cost a bit more than other powders, but so far I don't mind. Since I'm only using it in my range gun, a pound goes pretty far.

 

[Txhillbilly]

I use H335 mainly,but also use H322,BL-C2.and Varget with good results

 

[Iloadntie]

Has anyone used H322 with 52 gr HP?

 

[Fatelvis]

Has anyone used H322 with 52 gr HP?

Yes, very accurate for me using 23.4 grns of H322.

 

[Blown6L]

H322 is all I use in .223 Remington now.

 

[Walkalong]

H332? Never heard of it.

 

[dls56]

23.1 grains pushing a 55 grain v-max yeilds great results for me out of a Savage model 14 with a target crown cut onto it. Tiny groups at 100 yards when I do my part, like it better than Benchmark and it isn't bad either.