jeeptim
Member
Posted a request for help got a lot of lookers but no input shot well untill i took it out hunting few rounds then the bolt started sticking to the rear will only go forward with a good wack. The wacks cant be good for it. took it all the way down even the bolt it was dirty cleaned put it back with a lil oil no change took it down again and started polishing with a dremmil all is slick as snot cant see what maybe hanging up and God knows i have looked kinda at a loss never have I had a problem like this I couldent figure out.
I just dont want to start replacing parts.
What I did find is that it still jambs with the barell, chamber, and trigger removed now with all this removed things change and may be jambing differently. Thought it may be the closing spring or rod but things are bound going to try and see if any adjustment can be done on the closing unit feels as if the bolt is not in proper position DUH!! Well after thinking out loud the light at the end of the tunnel no longer looks like a train.
ANY offered help would be nice.
Thanx
I just dont want to start replacing parts.
What I did find is that it still jambs with the barell, chamber, and trigger removed now with all this removed things change and may be jambing differently. Thought it may be the closing spring or rod but things are bound going to try and see if any adjustment can be done on the closing unit feels as if the bolt is not in proper position DUH!! Well after thinking out loud the light at the end of the tunnel no longer looks like a train.
ANY offered help would be nice.
Thanx